0 Bikes / 493 Posts / 34 Comments / Joined 2015-05-21 / Feedback: 27 0 0
Bikes Profile Feedback Comments
A 1997 Slammer has 1 1/8 a-headset so either that is the wrong fork or it's possibly a 1999 Air...
The instructions mention "Ratchet side" and " Pawl Springs". This is not for coaster brake hubs..
Boa and 860 are not the same brake...This is an 860.
That is an Air not a Compe
Just an FYI 24tpi is for Coaster Brake hubs...The only peregrine wheel it will work with is the mags with a coaster shell in them...
Hey brother those are Hoffman came on a Georges...
Dude - call me for counseling after...ha
What is the Top Tube length? Seems small and I was looking for the F1C with 18.5tt...If you dont know- measure from center of headset to Center of seat post. Also, do you have more pictures of this frame?
Is it NOS?
You put a 1 in front of the 695 by mistake?
Your description doesn't even make sense. Locking Freewheel? You are clueless.
False- The single adjuster is for Free Trac Hub shown above. The single converts from freewheel to fixie.
Cool, I have never seen that bike..
George has 18 3/4 TT, Dirt Merchant is a different model all together and has 20tt
NOS 86 with Kool Stop Brake Pads?
FYI - That's the wrong sprocket. That hub comes with similar sprocket with one adjuster to swap between freewheel and direct drive...
Those forks are not 1 inch... and if they are they are not correct for that bike.. Those take 1 1/8 super fork top nut...
What's the diameter
here? not here? whats the deleo?
If that came off the sugar baby it should be one inch and not 1 1/8 as stated
Will this work on a hoffman superfork 1 1/8?
I've had sd4 and ep forks like these but those droputouts are no right . Diamond back also had this style fork but most of those have a diamond cut out in the droput. Not sure what the flash forks look like
That is a taska hub
Is this for 7/8 post or 1 inch?
10 bucks on ebay
That is a Bendix hub with suntuor parts fyi
Type 1 and 2 have different arm and a few different Internal parts
Aluminum or steel? 3/8 or 14mm? do you know length and width? Thanks.
That's for shimano
Are these still there?
Is it one inch headset? Do you know the top tubt length? Thanks
threaded or unthreaded?
Home / Contact / About / Links
Site By Clixel