You are not logged in.
Pages: 1
peregrine 3 piece crank arms 
#1 2009-05-23 12:58pm
- brian84corvette
- Expert
- From: Ft Lauterdale, FL
- Registered: 2008-11-01
- Posts: 848
- Bikes: 9
- Feedback: 26 0 0
peregrine 3 piece crank arms
whell, I did manage to swing it, and managed to get my dirty little hands on
some crank arms. 2 are drive side. 4 are non drive side.
there are a fiew diffrent styles of them
one of the six has its spindle mounting splines side to side instead of up and down
on the arms like all the rest do.
and some take small pinch bolts - and some take large pinch bolts
and a pair take some weird bolt and nut combination that is missing.
I soo wish I could of found a pair of spindles for theese. wonder if rini has any
that will work on them.....
here is way too many pix of them.
if any one needs to see close up pix of the diffrent styles of pinch bolt mounting on them
ill try and do my best with my crappy digi camera to take good pix of them.
Bass adicted - car stereo crazy - flatlanding any bike with pegs
hittin switches in the old school low low goin down the block
rollin on Dz and blastin my musics
Offline
#2 2009-05-23 1:19pm
- brian84corvette
- Expert
- From: Ft Lauterdale, FL
- Registered: 2008-11-01
- Posts: 848
- Bikes: 9
- Feedback: 26 0 0
Re: peregrine 3 piece crank arms
just confirmed that I have 2 peregrine spindles on the way also !
looks like ill be able to build up 2 pair of theese
Bass adicted - car stereo crazy - flatlanding any bike with pegs
hittin switches in the old school low low goin down the block
rollin on Dz and blastin my musics
Offline
#3 2009-05-23 1:57pm
- nintendoninja
- "GT JUGGALO"
- From: North Phoenix, AZ
- Registered: 2009-04-17
- Posts: 4349
- Bikes: 9
- Feedback: 58 0 0
Re: peregrine 3 piece crank arms
please post the differences you are talking about.....
can i have a set?
Offline
#4 2009-05-23 2:25pm
- five
- BMXer 4 Life
- From: Minnesota
- Registered: 2008-12-30
- Posts: 5899
- Bikes: 1
- Feedback: 276 0 0
- Website
Re: peregrine 3 piece crank arms
Selling any?
Offline
#5 2009-05-23 2:53pm
- brian84corvette
- Expert
- From: Ft Lauterdale, FL
- Registered: 2008-11-01
- Posts: 848
- Bikes: 9
- Feedback: 26 0 0
Re: peregrine 3 piece crank arms
here goes. crank arms are labeled 1 thru 6
1 and 2 are the odd ball left arms with no matches.
crank arm #1 shares the same threaded bolt as crank arm #6 but its missing the bolt.
crank arm #2 has a verry large pinch mounting bolt, and its splines are off 90deg. to all the other crank arms. #2 arm is threaded for the pinch nut.
crank arms #3 and #4 are a matching pair.
the pinch bolts on theese arms are not threaded in any way, apparently they use a bolt and a lock nut on them and have a "flat" integrated in to the crank arm in wich the nut will rest.
crank arms #5 and #6 are a matching pair, and use the smaller threaded bolt on pinch
here is a picture of crank arm #2 and #6 to show the diffrence in pinch bolt size.
I wonder - why is there so many diffrences in theese cranks ? I would imagine they would
be all the same, but apparently they vary widely.
Bass adicted - car stereo crazy - flatlanding any bike with pegs
hittin switches in the old school low low goin down the block
rollin on Dz and blastin my musics
Offline
#6 2009-05-23 4:02pm
- nintendoninja
- "GT JUGGALO"
- From: North Phoenix, AZ
- Registered: 2009-04-17
- Posts: 4349
- Bikes: 9
- Feedback: 58 0 0
Re: peregrine 3 piece crank arms
thats odd.
but i will take a matching pair if you wanna sell
Offline
#7 2013-05-01 12:24pm
- SSonberg1
- Member
- Registered: 2013-04-23
- Posts: 52
- Feedback: 0 0 0
Re: peregrine 3 piece crank arms
Where dide you find the spindle? I am looking for a spindle and bottom bracket for my arms. Any help? I am starting to feel like this is the search for me lucky pot o gold!
Offline
#8 2013-05-01 12:38pm
- xtremevert
- Pro MemberThe Gate Keeper
- From: North of Reality
- Registered: 2007-09-23
- Posts: 11632
- Bikes: 19
- Feedback: 125 0 0
Re: peregrine 3 piece crank arms
SSonberg1 wrote:
Where dide you find the spindle? I am looking for a spindle and bottom bracket for my arms. Any help? I am starting to feel like this is the search for me lucky pot o gold!
Ha ha dude this thread is ancient man! start a new one.
My Father once spoke to me and said "The way you look at your bike is the way I see My children, I look past the imperfections and rough surfaces to the beauty of the finished product."
Offline
#9 2017-04-03 11:01am
- Krobot
- Museum Newbie
- Registered: 2017-03-28
- Posts: 8
- Bikes: 1
- Feedback: 0 0 0
Re: peregrine 3 piece crank arms
Hi all I have them peregrine cranks with no nuts on them. And in chrome.
Offline
Pages: 1