You are not logged in.
Spoke Length Database For Wheel Builders!
#501 2020-06-12 8:50am
- deli_mas
- Museum Addict
- From: Somewhere in Malaysia@Malaya
- Registered: 2008-06-21
- Posts: 1118
- Bikes: 14
- Offline
Re: Spoke Length Database For Wheel Builders!
any idea size of spokes for araya aero rim with high flange hub?
** BMX Closed Shop Until Further Notice **
Offline
#502 2020-06-25 4:14pm
- HammeredGold
- Museum Newbie
- From: Maryland
- Registered: 2017-09-12
- Posts: 4
- Bikes: 2
- Offline
Re: Spoke Length Database For Wheel Builders!
Looking for spoke size for campy record high flange and araya 7c 20x1.75. 36 spokes.
Looking for spoke length for 3x and 4x because I haven't decided yet.
Thanks
Offline
#503 2020-06-27 7:56am
- oneflare
- Pro Member
- From: Maryland
- Registered: 2019-10-23
- Posts: 394
- Bikes: 18
- For Sale: 23
- Website Offline
Re: Spoke Length Database For Wheel Builders!
S&M BEN wrote:
For most 20” rim/hub sets 3x will be 184mm and 4x will be 194mm high or low flange!
I don't understand how a high flange and low flange hub can have the same length spoke... Doesn't that make the spoke base come accross the hub face at a drastic angle?
ISO Hutch Judge f&f
***Beware of dealings w/Sergio Oliveira on FB not sure if he's on here... He doesn't disclose damages, repairs, or stuck seat posts. You better ask!***
Offline
#504 2020-07-01 9:52pm
- Dirty Habits
- Pro MemberAin't nothing like a "$UCIO PARTY"
- From: THE DARK $IDE OF CALI 💀💀💀
- Registered: 2008-11-10
- Posts: 27075
- Bikes: 46
- For Sale: 21
- Offline
Re: Spoke Length Database For Wheel Builders!
thread!!!
[img]https://i.postimg.cc/pXMBPm4q/dirty-tequila-logo.jpg[/img]
I asked God for a bike, but I know God doesn't work that way. So I stole a bike and asked for forgiveness............-Emo Philips
Offline
#505 2020-07-03 2:37pm
#506 2020-08-27 12:50pm
- Spintech
- Pro MemberMinimalist hoarder
- From: The Valley, CA
- Registered: 2011-07-26
- Posts: 3997
- Bikes: 4
- For Sale: 2
- Offline
Re: Spoke Length Database For Wheel Builders!
I just laced this combo. Confirmed & verified:
20" Araya Aero rims 36h to Bullseye Hubs... 4X lace = Front 188mm, Rear 189mm.
-Joe
Offline
#507 2020-08-27 12:57pm
- Spintech
- Pro MemberMinimalist hoarder
- From: The Valley, CA
- Registered: 2011-07-26
- Posts: 3997
- Bikes: 4
- For Sale: 2
- Offline
Re: Spoke Length Database For Wheel Builders!
Way2slick wrote:
Searched the whole thread and didn't find my combo. Really hoping someone sees this and has an answer.
48h Gt Mohawks to Weinmann ZacX rims?
I have this on my GT Show and PFT. Before I can reply, can you verify if your 48h mohawks are mid flange or high flange? They came in those 2 configurations. Measure the diameter of the flange from end to end and I can plug it in my spreadsheet.
Which one of these do you have??
Low flange 48
High flange 48
Last edited by Spintech (2020-08-27 12:58pm)
-Joe
Offline
#508 2020-11-21 3:01pm
- agedwvbmxrider
- Pro Member
- From: NJ
- Registered: 2016-08-28
- Posts: 725
- For Sale: 6
- Offline
Re: Spoke Length Database For Wheel Builders!
Anyone know spoke length for OS20 builds? Getting ready to do TNT OS20 rims with Profile SS hubs and need to order spokes, 3 cross pattern.
Last edited by agedwvbmxrider (2020-11-21 3:02pm)
Offline
#509 2020-11-28 6:12am
- Agentxxiii
- Pro MemberRichy Rich Dude
- From: MD
- Registered: 2010-09-21
- Posts: 3747
- Bikes: 10
- For Sale: 3
- Online
Re: Spoke Length Database For Wheel Builders!
Any help on this would be appreciated, I have
Sun rhyno lite hoops 20 inch 36 hole
90s sealed DK hubs flip flop rear
What size spokes do I need for 3x...I was thinking 188 but would like to confirm
The rear hub is slightly larger in diameter. Do I need a different size for front and rear?
Last edited by Agentxxiii (2020-11-28 6:13am)
Time machine wanted!
Online
#510 2020-12-02 6:36pm
- OldSchoolToNewMech
- Member
- From: San Antonio, TX
- Registered: 2020-07-10
- Posts: 29
- Offline
Re: Spoke Length Database For Wheel Builders!
DIPSOMANIAC wrote:
G. wrote:
Profile Race hubs (the older big body style)
and
24" 36 hole Sun Rhyno Lites
3 cross = 235mmIf 3X is 235 what spoke length would be required for 4X?
Reason i ask is i recently got a set of the Profile SS's and they are a little bigger than the KORE hubs i currently use.
Rather than having to buy new spokes i was thinking i could pull them apart and lace them 4X to make up for the difference.
It seems like spokes are 8mm longer to do 4x. There is a calculator on BMXunion I believe. If your hubs are not listed you could search any hub and rim and look at difference in spoke length to sis your needs. Hope this helps. If I'm incorrect, anyone please correct me.
Offline
#511 2020-12-02 6:37pm
- OldSchoolToNewMech
- Member
- From: San Antonio, TX
- Registered: 2020-07-10
- Posts: 29
- Offline
Re: Spoke Length Database For Wheel Builders!
Agentxxiii wrote:
Any help on this would be appreciated, I have
Sun rhyno lite hoops 20 inch 36 hole
90s sealed DK hubs flip flop rear
What size spokes do I need for 3x...I was thinking 188 but would like to confirm
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5a8c95.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5b14e8.jpg
The rear hub is slightly larger in diameter. Do I need a different size for front and rear?
Yes.
Offline
#512 2020-12-03 2:38am
- Agentxxiii
- Pro MemberRichy Rich Dude
- From: MD
- Registered: 2010-09-21
- Posts: 3747
- Bikes: 10
- For Sale: 3
- Online
Re: Spoke Length Database For Wheel Builders!
OldSchoolToNewMech wrote:
Agentxxiii wrote:
Any help on this would be appreciated, I have
Sun rhyno lite hoops 20 inch 36 hole
90s sealed DK hubs flip flop rear
What size spokes do I need for 3x...I was thinking 188 but would like to confirm
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5a8c95.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5b14e8.jpg
The rear hub is slightly larger in diameter. Do I need a different size for front and rear?Yes.
Correct me if I'm wrong, this is an assumption. The rear hub is slightly narrower than the front in width (horizontally) witch makes the same size spokes work front and rear. Even though the diameter is slightly different.
I went with 188 front and rear...
Time machine wanted!
Online
#513 2020-12-08 8:25pm
- Kennyazzolino
- Museum Newbie
- Registered: 2018-04-13
- Posts: 1
- Offline
Re: Spoke Length Database For Wheel Builders!
Ok guys I’ve searched but no luck does anyone know the spoke length for araya 7x , 24 x1.75 36 hole hoops paired with gt race lace first gen hubs And 3x most likely my original set was 4x
Offline
#514 2020-12-09 2:44am
- Charlie Brown
- Pro MemberCB Doom
- From: St. Petersburg, FL
- Registered: 2007-07-28
- Posts: 11501
- Offline
Re: Spoke Length Database For Wheel Builders!
Kennyazzolino wrote:
Ok guys I’ve searched but no luck does anyone know the spoke length for araya 7x , 24 x1.75 36 hole hoops paired with gt race lace first gen hubs And 3x most likely my original set was 4x
3X: 240mm front, 238mm rear
Last edited by Charlie Brown (2020-12-09 2:46am)
Be sure to follow my BMX restoration page on Instagram: charlies.bmx.restorations
Offline
#515 2021-01-24 6:48pm
- JCHammer
- Pro Member
- From: Boise, Idaho
- Registered: 2020-08-30
- Posts: 430
- Bikes: 2
- For Sale: 5
- Offline
Re: Spoke Length Database For Wheel Builders!
192mm spokes for Z-rim and Superlace combo with 4 lace pattern 
Get busy riding or get busy dying
Offline
#516 2021-02-11 8:57am
- euy
- Pro Member
- From: So Cal
- Registered: 2019-07-09
- Posts: 28
- For Sale: 2
- Offline
Re: Spoke Length Database For Wheel Builders!
hubs: phil wood LF track hub
hoops: ukai speedline 26
spokes and nipples: phil wood
262 front 
261 rear
Last edited by euy (2021-02-11 9:05am)
Offline
#517 2021-02-26 9:40pm
- Skraelos
- Pro MemberNew Old Shoes (NOS)
- From: Pittsburgh, Pennsylvania
- Registered: 2017-10-08
- Posts: 1205
- Offline
Re: Spoke Length Database For Wheel Builders!
Need help on spoke length for
- Black Primo Son of a Bomb hubs 48 hole 3/8 axle
- lacing to Primo Hula Hoops
-front hub calls for 12G spokes assuming both can use these and only these.
- not sure about patterns total noob
-flatland, vert.
[img][/img]
Looking for CNC machined 6061 aluminum AheadSet Stem with patented steerer Safety Lock
Looking for 25.4mm 1" XS seat post and XS seat that fits "Overpaying for both"
Looking for Hoffman Bikes Seat 25.4 NOS, GOOD, or Excellent condition "Overpaying"
Offline
#518 2021-02-27 7:25pm
- MonroviaMike
- Museum Newbie
- Registered: 2021-01-17
- Posts: 10
- Offline
Re: Spoke Length Database For Wheel Builders!
I’ve looked, possible I may have missed it, but looking to 3 cross lace JP low flange to araya super 7x 20”
Offline
#519 2021-03-02 10:43am
- Spintech
- Pro MemberMinimalist hoarder
- From: The Valley, CA
- Registered: 2011-07-26
- Posts: 3997
- Bikes: 4
- For Sale: 2
- Offline
Re: Spoke Length Database For Wheel Builders!
Agentxxiii wrote:
Any help on this would be appreciated, I have
Sun rhyno lite hoops 20 inch 36 hole
90s sealed DK hubs flip flop rear
What size spokes do I need for 3x...I was thinking 188 but would like to confirm
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5a8c95.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5b14e8.jpg
The rear hub is slightly larger in diameter. Do I need a different size for front and rear?
You can use slightly longer or shorter spokes (by 1-2mm) So for that combo you can go 188 rear and 190 front. This is what my spreadsheet says:
-Joe
Offline
#520 2021-03-02 10:53am
- skdevore
- Pro MemberIt's Not For Sale, Francis!
- From: Claremont, CA
- Registered: 2010-04-30
- Posts: 5644
- Bikes: 41
- Offline
Re: Spoke Length Database For Wheel Builders!
I used 182’s front and back for this 3x combination.
There's no help for this Museum Junkie!
Offline
#521 2021-03-04 5:01pm
#522 2021-03-04 5:29pm
- cog-hat
- Pro Member
- Registered: 2020-04-16
- Posts: 503
- Bikes: 60
- Offline
Re: Spoke Length Database For Wheel Builders!
x
Offline
#523 2021-03-04 6:14pm
- Agentxxiii
- Pro MemberRichy Rich Dude
- From: MD
- Registered: 2010-09-21
- Posts: 3747
- Bikes: 10
- For Sale: 3
- Online
Re: Spoke Length Database For Wheel Builders!
Spintech wrote:
Agentxxiii wrote:
Any help on this would be appreciated, I have
Sun rhyno lite hoops 20 inch 36 hole
90s sealed DK hubs flip flop rear
What size spokes do I need for 3x...I was thinking 188 but would like to confirm
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5a8c95.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 5b14e8.jpg
The rear hub is slightly larger in diameter. Do I need a different size for front and rear?You can use slightly longer or shorter spokes (by 1-2mm) So for that combo you can go 188 rear and 190 front. This is what my spreadsheet says:
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 86d636.jpg
Thanks I appreciate the information...the 188 worked fine on front and rear.
Time machine wanted!
Online
#524 2021-03-04 6:18pm
- Agentxxiii
- Pro MemberRichy Rich Dude
- From: MD
- Registered: 2010-09-21
- Posts: 3747
- Bikes: 10
- For Sale: 3
- Online
Re: Spoke Length Database For Wheel Builders!
I'll get a better pic of the wheels.
Time machine wanted!
Online
#525 2021-03-24 4:29pm
- jlowpez7
- Pro Member
- From: El Paso, Tx
- Registered: 2020-08-15
- Posts: 15
- Bikes: 5
- For Sale: 26
- Offline
Re: Spoke Length Database For Wheel Builders!
Thread x
Offline