BMXmuseum.com Forums

mcseforsale · 2009-11-02 6:34am

I know that a lot of us use the Primos in the PowerSeries place because of their close resemblance. Do the spindles fit as well?

Just curious.

AJ

RL-20II Guy wrote:
Dyno-Mike wrote:
do you have plans to put the power series cranks on there? cause that will literally set it off! amazing job, i keep checking back just to look at it
I had two sets of the arms for the longest time.......but no spindles, so I sold them. I just could not find any spindles.........and they really don't come available even as complete sets on ebay.

These are about 1 year shy of era correct though, I like them. Go good with the GT Prower Series neck too.

Immortis · 2009-11-02 8:15am

I need a set of those Slammer decals... anyone know where to get them??

RL-20II Guy · 2009-11-02 9:40am

mcseforsale wrote:
I know that a lot of us use the Primos in the PowerSeries place because of their close resemblance. Do the spindles fit as well?

Just curious.

AJ

RL-20II Guy wrote:
Dyno-Mike wrote:
do you have plans to put the power series cranks on there? cause that will literally set it off! amazing job, i keep checking back just to look at it
I had two sets of the arms for the longest time.......but no spindles, so I sold them. I just could not find any spindles.........and they really don't come available even as complete sets on ebay.

These are about 1 year shy of era correct though, I like them. Go good with the GT Power Series neck too.

No, I looked into that. The spindles are larger on the new Primos.

chromey · 2009-11-02 10:13am

Looks great! Very Voelker!

The pegs you used are a great substitute for the Dyno pegs too.

RL-20II Guy · 2009-11-02 12:51pm

chromey wrote:
Looks great! Very Voelker!

The pegs you used are a great substitute for the Dyno pegs too.

Yeah, they are not the best of quality. You can not really use them as "nuts" to tighten down on. They are very thin in the thread area.

RL-20II Guy · 2009-11-02 3:31pm

chromey wrote:
Looks great! Very Voelker!

Last edited by RL-20II Guy (2009-11-02 3:32pm)

chromey · 2009-11-02 3:34pm

RL-20II Guy wrote:
chromey wrote:
Looks great! Very Voelker!

http://www.knt2000sCustoms.com/vintage/ … 1990_3.jpg

Or baby Mirra, too

nintendoninja · 2009-11-02 4:47pm

good choice on the cranks! the old power series cranks are overpriced crap! gt/profile chromoly cranks for life!

Dyno-Mike · 2009-11-02 5:00pm

nintendoninja wrote:
good choice on the cranks! the old power series cranks are overpriced crap! gt/profile chromoly cranks for life!

i totally agree except where you said they were overpiced crap...because that is an opinion and you are entitled to it no matter how wrong it is im jk, i love PS cranks and have never heard a single thing bad about em

jayoldmanbmx · 2009-11-02 5:16pm

this is a great bike nice job on this one would not change nothing!!

ghost spidah · 2009-11-02 5:25pm

RL-20II Guy wrote:
mcseforsale wrote:
I know that a lot of us use the Primos in the PowerSeries place because of their close resemblance. Do the spindles fit as well?

Just curious.

AJ

RL-20II Guy wrote:

I had two sets of the arms for the longest time.......but no spindles, so I sold them. I just could not find any spindles.........and they really don't come available even as complete sets on ebay.

These are about 1 year shy of era correct though, I like them. Go good with the GT Power Series neck too.
No, I looked into that. The spindles are larger on the new Primos.

If i'm not mistaken, the spindle on the Power Series crank is 20mm, the same as the first generation Primo cranks (circa '94-'96). The second generation Powerbites ('97-'01) use a 22mm spindle, same as the third gen. ('02-present).

lou · 2009-11-02 5:44pm

From The Hoff to McFly. lol. That color realy stands out. Not too many red bikes out there.

RL-20II Guy · 2009-11-02 8:24pm

lou wrote:
From The Hoff to McFly. lol. That color realy stands out. Not too many red bikes out there.

This is one of the "sportiest" build's I've done thus far.

Frank250 · 2009-11-02 9:52pm

Looks Flawless From Here!

Already One Of My Fav's.

I Just Sold Some SR/PS Cranks Because of what theyre going for and made enough to buy 3 sets of GT/Profiles

RL-20II Guy · 2009-11-03 11:57am

Frank250 wrote:
Looks Flawless From Here!

Already One Of My Fav's.

Thanks, but it not completely flawless.......my lower Gyro cable is a little short. It is used, the only one that I have.

Can anyone spare a good or new original black Gyro lower cable???

Last edited by RL-20II Guy (2009-11-03 11:57am)

jimmybills · 2009-11-03 2:00pm

RL-20II Guy wrote:
brindle wrote:
mcseforsale wrote:
Wow. It's amazing how you made that DMC look like a TransAm.
I think the DMC is done and he's working on the Knight rider car now... Correct me if Im wrong
I am building two (2) cars at once.......KITT and the DMC. The DMC is far from done........KITT is actually closer to completion. The DMC is going to be the Back to the Future car....

thats what i was thinking when i first saw the pics but i thought 'no way is this dude doing this'

MAD props for those projects, the DeLorean looks clean enough to eat off, and the instrumention on KITT looks spot on.

good for you man.

oh, badass dyno too

RL-20II Guy · 2009-11-03 2:17pm

jimmybills wrote:

That's what i was thinking when I first saw the pics but I thought 'no way is this dude doing this.

MAD props for those projects, the DeLorean looks clean enough to eat off, and the instrumentation on KITT looks spot on.

Good for you man.

oh, badass Dyno too

Thanks

This is my other "hobby" that keep me busy.

pdifi · 2020-04-25 2:15pm

Hey this is awesome, i have the same one and trying to restore it. are you able to tell me where you got the front pegs? and what make they are? the fork design limits what pegs i can put on and i’m really missing having from pegs

mitter · 2020-06-25 5:27pm

pdifi wrote:
Hey this is awesome, i have the same one and trying to restore it. are you able to tell me where you got the front pegs? and what make they are? the fork design limits what pegs i can put on and i’m really missing having from pegs https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 87b8c.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 87d75.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 87ebf.jpeg

Cool to see Tech 7’s levers and super lace wheels on a rider!!! $$$

pdifi · 2020-06-25 6:30pm

Awesome man. i actually ordered the Gt steel ones, but the guy bike shop had those laying around and switched them because i was worried about the clearance on the forks. here are some picks for you, they don’t have any stamps or marks so don’t have a name.next time i head over there, i’ll ask him brand name for you.

pdifi · 2020-06-25 6:32pm

To be honest one of them starting stripping th threads on my Og super lace axels which really posed me off. hence i only have one on right now.

BMXmuseum.com Forums

Bikes

Reference

For Sale

Forums

Goods

Map

Login

~ Dyno Slammer ~

#26 2009-11-02 6:34am

Re: ~ Dyno Slammer ~

RL-20II Guy wrote:

Dyno-Mike wrote:

#27 2009-11-02 8:15am

Re: ~ Dyno Slammer ~

#28 2009-11-02 9:40am

Re: ~ Dyno Slammer ~

mcseforsale wrote:

RL-20II Guy wrote:

Dyno-Mike wrote:

#29 2009-11-02 10:13am

Re: ~ Dyno Slammer ~

#30 2009-11-02 12:51pm

Re: ~ Dyno Slammer ~

chromey wrote:

#31 2009-11-02 3:31pm

Re: ~ Dyno Slammer ~

chromey wrote:

#32 2009-11-02 3:34pm

Re: ~ Dyno Slammer ~

RL-20II Guy wrote:

chromey wrote:

#33 2009-11-02 4:47pm

Re: ~ Dyno Slammer ~

#34 2009-11-02 5:00pm

Re: ~ Dyno Slammer ~

nintendoninja wrote:

#35 2009-11-02 5:16pm

Re: ~ Dyno Slammer ~

#36 2009-11-02 5:25pm

Re: ~ Dyno Slammer ~

RL-20II Guy wrote:

mcseforsale wrote:

RL-20II Guy wrote:

#37 2009-11-02 5:44pm

Re: ~ Dyno Slammer ~

#38 2009-11-02 8:24pm

Re: ~ Dyno Slammer ~

lou wrote:

#39 2009-11-02 9:52pm

Re: ~ Dyno Slammer ~

#40 2009-11-03 11:57am

Re: ~ Dyno Slammer ~

Frank250 wrote:

#41 2009-11-03 2:00pm

Re: ~ Dyno Slammer ~

RL-20II Guy wrote:

brindle wrote:

mcseforsale wrote:

#42 2009-11-03 2:17pm

Re: ~ Dyno Slammer ~

jimmybills wrote:

#43 2020-04-25 2:15pm

Re: ~ Dyno Slammer ~

#44 2020-06-25 5:27pm

Re: ~ Dyno Slammer ~

pdifi wrote:

#45 2020-06-25 6:30pm

Re: ~ Dyno Slammer ~

#46 2020-06-25 6:32pm

Re: ~ Dyno Slammer ~

Board footer