BMXmuseum.com Forums

johnu773 · 2021-02-19 7:29am

walribco wrote:
johnu773 wrote:
I still have to tweak & dial it in, but here's my 19.25" 250L wirh 12.75" rear end. Hoping to have a blast on the streets & at the park while gettin' my soul ride on! I took it out for a quick spin in the snow today. It definitely needs an upright stem. Ride 'em!

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … c7cba.jpeg https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … c8a00.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … c8aaa.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … c8ab2.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … c8aba.jpeg
man looks great. love the geo!

Thanks. I cant wait to shred it

Forhisglory_1 · 2021-02-23 7:58pm

After looking for a STA frame and mid school stem for a long time I finally picked these up on here. I literally can’t wait to build it up. The powder coated chrome looks way better than I expected. Plans so far are mid school Standard stem, Pitchforks from about 10 years ago with huge fork legs, steer tube cut way down on the forks with the Stranger Ballast headset so the stem is low as possible.

Last edited by Forhisglory_1 (2021-02-23 8:05pm)

johnu773 · 2021-02-23 8:32pm

Forhisglory_1 wrote:
After looking for a STA frame and mid school stem for a long time I finally picked these up on here. I literally can’t wait to build it up. The powder coated chrome looks way better than I expected. Plans so far are mid school Standard stem, Pitchforks from about 10 years ago with huge fork legs, steer tube cut way down on the forks with the Stranger Ballast headset so the stem is low as possible. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ecdd2.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ece0f.jpeg

Looks great! Can't wait to see it built up & shreddin' Going with black wheels or silver/chrome?

Forhisglory_1 · 2021-02-24 5:54am

johnu773 wrote:
Forhisglory_1 wrote:
After looking for a STA frame and mid school stem for a long time I finally picked these up on here. I literally can’t wait to build it up. The powder coated chrome looks way better than I expected. Plans so far are mid school Standard stem, Pitchforks from about 10 years ago with huge fork legs, steer tube cut way down on the forks with the Stranger Ballast headset so the stem is low as possible. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ecdd2.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ece0f.jpeg
Looks great! Can't wait to see it built up & shreddin' Going with black wheels or silver/chrome?

Right now the plan is to use a all black wheelset. Still trying to decide on 2 or 4 piece bars and black or chrome. Also thinking about running a black 28t GT overdrive sprocket with the polished cut outs.

johnu773 · 2021-02-24 6:08am

Forhisglory_1 wrote:
johnu773 wrote:
Forhisglory_1 wrote:
After looking for a STA frame and mid school stem for a long time I finally picked these up on here. I literally can’t wait to build it up. The powder coated chrome looks way better than I expected. Plans so far are mid school Standard stem, Pitchforks from about 10 years ago with huge fork legs, steer tube cut way down on the forks with the Stranger Ballast headset so the stem is low as possible. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ecdd2.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ece0f.jpeg
Looks great! Can't wait to see it built up & shreddin' Going with black wheels or silver/chrome?
Right now the plan is to use a all black wheelset. Still trying to decide on 2 or 4 piece bars and black or chrome. Also thinking about running a black 28t GT overdrive sprocket with the polished cut outs.

Thats what I have on mine but 25T

Forhisglory_1 · 2021-02-24 7:28am

I am loving this Stranger headset cap. I can’t believe I had never seen it prior to a few weeks ago.

So I am going to run a wheelset I have with a Primo Remix hub. Does anyone know where I can find a 10t driver for it? Or do if you know if the rumblings are true that a Profile mini driver will work with the Remix hub?

Last edited by Forhisglory_1 (2021-02-24 7:49am)

suicidepan · 2021-02-24 8:32pm

Just got these after many years of searching. 1st gen 1993 standard strip bars in original finish with later decals applied in the 90's. Standard made many versions of the six piece strip bar.

JHARJO · 2021-02-24 10:40pm

suicidepan wrote:
Just got these after many years of searching. 1st gen 1993 standard strip bars in original finish with later decals applied in the 90's. Standard made many versions of the six piece strip bar.https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 2838e6.jpg

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 284b70.jpg

Nice! Congrats D. We we’re just talking about these.

jaymeatsack · 2021-02-25 9:16am

Forhisglory_1 wrote:
I am loving this Stranger headset cap. I can’t believe I had never seen it prior to a few weeks ago.

So I am going to run a wheelset I have with a Primo Remix hub. Does anyone know where I can find a 10t driver for it? Or do if you know if the rumblings are true that a Profile mini driver will work with the Remix hub?

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 08365.jpeg

I have a Profile driver in a Primo mix, just had to run a small spacer on the axle internally between the driver and the hub.

suicidepan · 2021-02-25 11:59am

JHARJO wrote:
suicidepan wrote:
Just got these after many years of searching. 1st gen 1993 standard strip bars in original finish with later decals applied in the 90's. Standard made many versions of the six piece strip bar.https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 2838e6.jpg

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 284b70.jpg
Nice! Congrats D. We we’re just talking about these.

Thank you

suicidepan · 2021-02-25 2:45pm

This is kind of cool and something some people may not know about. This is the evolution of the six piece strip bar. The black bars in the 1st pic are 1st gen no knurling in the stem clamping area and the tubes at the bottom of the bars are cut square. Second pic the raw finish bars are prototype 2nd gen, no knurling in the stem clamping area and the tubes at the bottom of the bars are milled flat. Third pic 2nd gen production bars, now we see the classic three ring knurling, tubes still milled flat across the bottom and a increase in the upsweep of the grip tubes. Fourth pic these are 3rd Gen bars from 1997 , these bars are narrower at the base the the 2nd gen and the upsweep has been reduced.

Forhisglory_1 · 2021-02-25 3:25pm

suicidepan wrote:
This is kind of cool and something some people may not know about. This is the evolution of the six piece strip bar. The black bars in the 1st pic are 1st gen no knurling in the stem clamping area and the tubes at the bottom of the bars are cut square. Second pic the raw finish bars are prototype 2nd gen, no knurling in the stem clamping area and the tubes at the bottom of the bars are milled flat. Third pic 2nd gen production bars, now we see the classic three ring knurling, tubes still milled flat across the bottom and a increase in the upsweep of the grip tubes. Fourth pic these are 3rd Gen bars from 1997 , these bars are narrower at the base the the 2nd gen and the upsweep has been reduced. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 286c25.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 287d0b.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 2890b6.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 28a14b.jpg

So awesome thanks for sharing. One of my favorite things about BMX stuff is having the same part or frame from different years and seeing the differences, especially when you know why the changes were made over time. One of the reasons I love this site!

suicidepan · 2021-02-25 3:48pm

Forhisglory_1 wrote:
suicidepan wrote:
This is kind of cool and something some people may not know about. This is the evolution of the six piece strip bar. The black bars in the 1st pic are 1st gen no knurling in the stem clamping area and the tubes at the bottom of the bars are cut square. Second pic the raw finish bars are prototype 2nd gen, no knurling in the stem clamping area and the tubes at the bottom of the bars are milled flat. Third pic 2nd gen production bars, now we see the classic three ring knurling, tubes still milled flat across the bottom and a increase in the upsweep of the grip tubes. Fourth pic these are 3rd Gen bars from 1997 , these bars are narrower at the base the the 2nd gen and the upsweep has been reduced. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 286c25.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 287d0b.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 2890b6.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 28a14b.jpg
So awesome thanks for sharing. One of my favorite things about BMX stuff is having the same part or frame from different years and seeing the differences, especially when you know why the changes were made over time. One of the reasons I love this site!

JHARJO · 2021-02-25 6:58pm

suicidepan wrote:
This is kind of cool and something some people may not know about. This is the evolution of the six piece strip bar. The black bars in the 1st pic are 1st gen no knurling in the stem clamping area and the tubes at the bottom of the bars are cut square. Second pic the raw finish bars are prototype 2nd gen, no knurling in the stem clamping area and the tubes at the bottom of the bars are milled flat. Third pic 2nd gen production bars, now we see the classic three ring knurling, tubes still milled flat across the bottom and a increase in the upsweep of the grip tubes. Fourth pic these are 3rd Gen bars from 1997 , these bars are narrower at the base the the 2nd gen and the upsweep has been reduced. https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 286c25.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 287d0b.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 2890b6.jpg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 28a14b.jpg

So cool! Thanks for sharing D

Woodmaster · 2021-03-05 12:42pm

Strength beyond strength

suicidepan · 2021-03-05 6:45pm

A nice sticker pick up came in the mail today . Anyone have its match ?

Jared.P · 2021-03-06 8:48am

Forhisglory_1 wrote:
I am loving this Stranger headset cap. I can’t believe I had never seen it prior to a few weeks ago.

So I am going to run a wheelset I have with a Primo Remix hub. Does anyone know where I can find a 10t driver for it? Or do if you know if the rumblings are true that a Profile mini driver will work with the Remix hub?

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … 08365.jpeg

I have a Primo Mix Cassette with a 10t driver and it's from 2007 or 2008. It was the last year they did a 10t and I was unable to find new 10t drivers after that.

However, they continued to use 10t Mix Cassettes on the Tip Plus "Integral" line of bikes. If you can find an old Integral wheel, the 10t driver should work on a Mix and some newer ReMix hubs.

Profile drivers do not fit 4 pawl Mix or ReMix hubs (I've tried), but the pawls and springs are the exact same.

I prefer 10t drivers myself, but on my 9t wheels I run a 26 or 27t sprocket and it still feels decent.

AlurencatBMX · 2021-03-06 9:40am

suicidepan wrote:
A nice sticker pick up came in the mail today . Anyone have its match ?
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ecc74b.jpg

Get that scanned !

jimmyjambo43 · 2021-04-18 6:23pm

250 TRLS as found

socaldude · 2021-04-19 7:47pm

suicidepan wrote:
A nice sticker pick up came in the mail today . Anyone have its match ?
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ecc74b.jpg

Favorite decal style

Forhisglory_1 · 2021-04-20 11:20am

Finally finished up the STA. Super stoked on how it came out. The downside is I think it’s just gonna end up sitting.

**Now up for sale

Last edited by Forhisglory_1 (2021-04-21 11:52am)

walribco · 2021-04-21 9:47am

get em while you can!

johnu773 · 2021-04-22 6:35am

I used spare parts & leftovers from my old flatland bike to build up this Reklamation SKJ (made by SBC)

haro, indiana · 2021-04-22 3:04pm

johnu773 wrote:
I used spare parts & leftovers from my old flatland bike to build up this Reklamation SKJ (made by SBC)
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8424.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8678.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b88f0.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8b14.jpeg

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba324.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba353.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba3ae.jpeg

Perfect bike- is that 19" toptube?

johnu773 · 2021-04-23 7:06am

haro, indiana wrote:
johnu773 wrote:
I used spare parts & leftovers from my old flatland bike to build up this Reklamation SKJ (made by SBC)
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8424.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8678.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b88f0.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … b8b14.jpeg

https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba324.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba353.jpeg
https://s3.amazonaws.com/uploads.bmxmuseum.com/user-image … ba3ae.jpeg
Perfect bike- is that 19" toptube?

Yes sir it is.

BMXmuseum.com Forums

Bikes

Reference

For Sale

Forums

Goods

Map

Login

Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7176 2021-02-19 7:29am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

walribco wrote:

johnu773 wrote:

#7177 2021-02-23 7:58pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7178 2021-02-23 8:32pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

Forhisglory_1 wrote:

#7179 2021-02-24 5:54am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

johnu773 wrote:

Forhisglory_1 wrote:

#7180 2021-02-24 6:08am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

Forhisglory_1 wrote:

johnu773 wrote:

Forhisglory_1 wrote:

#7181 2021-02-24 7:28am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7182 2021-02-24 8:32pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7183 2021-02-24 10:40pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

suicidepan wrote:

#7184 2021-02-25 9:16am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

Forhisglory_1 wrote:

#7185 2021-02-25 11:59am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

JHARJO wrote:

suicidepan wrote:

#7186 2021-02-25 2:45pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7187 2021-02-25 3:25pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

suicidepan wrote:

#7188 2021-02-25 3:48pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

Forhisglory_1 wrote:

suicidepan wrote:

#7189 2021-02-25 6:58pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

suicidepan wrote:

#7190 2021-03-05 12:42pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7191 2021-03-05 6:45pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7192 2021-03-06 8:48am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

Forhisglory_1 wrote:

#7193 2021-03-06 9:40am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

suicidepan wrote:

#7194 2021-04-18 6:23pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7195 2021-04-19 7:47pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

suicidepan wrote:

#7196 2021-04-20 11:20am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7197 2021-04-21 9:47am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7198 2021-04-22 6:35am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

#7199 2021-04-22 3:04pm

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

johnu773 wrote:

#7200 2021-04-23 7:06am

Re: Standard Bykes post, lets get one started!! Post your bad a*s SBC's

haro, indiana wrote: