JP Pro Pedal Spindles 1/2 steel - READ DESCRIPTION - .375 for R6 Bearing DISPLAY ONLY
Paypal or Money Order, No trades, No Offers .... Thanks!
Will come in a cardboard mailing box and packed securely w/ tracking number.
Up for sale are (2) modified never ridden JP Steel spindles in aprox 1/2" thread for one piece cranks.
When I bought most of the JP inventory in 2011 there were a bunch of modified spindles.
Someone had taken standard JP Steel axles and cut them down from 9/16 to 1/2 thread.
WHoever did the rethread didn't do a very good job to say the least.
They are threaded slightly crooked, some threads not very sharp, and not threaded flush.
One spindle has higher threads and one lower. They measure different, but both same pitch.
All of that said I am selling these spindles for display purpose only.
They probably could be ridden but ride them at your own risk.
I'm sure since the threads are crooked it will feel like bent pedals.
The bearing seat is aprox .375 as seen in picture (3/8" ?? )
Not a step down spindle, will require 2 bearings with inner diamter of aprox 0.375 like R6-2RS
This is a JP spindle. Some earlier Crupi pedals used the same basic spindle that wasn't step down
bearing seat. So if you have a Crupi pedal that uses (2) R6 bearings on each pedal this might fit.
Caliper is not included, measurement not exact and for reference only. Crank not included either.
Just wanted to show these spindles mounted to a crank, to picture the gap between spindle/crank.
The (2) modified spindles in picture #1 will be included, in exact condition.
Picture are from the exact parts that the buyer will receive. (2) Spindle bolts are included.
Parts have tool marks/weathering/blemishes/gouges/dings/dents/etc, shelfware and alterations.
USPS First Class mail w/ tracking. Shipping available to the Continental USA or Hawaii only.
Will be sold as-is, I don't accept returns.
Please, no APO's and no Puerto Rico.