2012 Standard 125R
Candy orange over chrome
I purchased this frame, used, in chrome. The plating was very thin and rusting through in a few spots, so I decided to modified it a bit. I cut off the V brake mounts and cable guides. I welded on some 990 mounts on the chainstay, made some cable guides from some steel tubing and a cable top out of a stainless bolt.I then shot the frame with Por 15 - Glisten PC tinted with House of Kolor candy tangerine concentrate.Cranks :
I removed the spider off of the Cliq cranks (not as easy as it sounds!) and polished just the spider for something a bit different.Seat post:
is a 27.2 post that was carefully sanded to 27.0 on a lathe since I could not find a pivotal 27.0 in polished.
Thanks for looking!
Complete Parts List:
FRAME 2012 STANDARD 125R -22IN T.T
FORK 2011 ODYSSEY R-32
BARS STOLEN CELL BAR 8.65IN RISE; 28.5IN WIDE
STEM STRANGER BLOCK
HEADSET FBM INTEGRATED
LEVER ODYSSEY MONOLEVER TRIGGER
GRIPS MORPHINE LOCK ON
CABLE ODYSSEY QUIK SLIK
BRAKE ODYSSEY EVO I
SEAT POST ALIUS 27.0MM (CAREFULLY SANDED FROM 27.2 ON LATHE)
SEAT CLAMP SALSA QUICK RELEASE
SEAT TIOGA D-SPYDER PIVOTAL
BOTTOM BRCKT HAWK RACING
CRANKS cLIQ 180MM; CUSTOM POLISHED SPIDER
CHAINWHEEL ELEVEN IND.
CHNWL BOLTS CHROMOLY
CHAIN SRAM PC-870
CHAIN TENS. JW CHAIN TENSIONERS 1-1/8
PEDALS DMR VAULT
HUBS SUPERCROSS 36H W/15T DRIVER
SPOKES SAPIM 14 GAUGE, S.S
FRONT RIM ALIENATION DEVIANT. 20X1.75 36H
REAR RIM ALIENATION RUNAWAY 20X1.75 36H
NIPPLES BRASS, CHROME PLATED
FRONT TIRE KENDA KONVERSION TAN WALL 1.75"
REAR TIRE KENDA KONVERSION TAN WALL 1.65"
TUBES DANS COMP 20X1.75
Submitted by dirkBMX