BMX Bikes / S / SE Racing / 2019 SE Racing Big Ripper 29
2019 SE Racing Big Ripper 29

2019 SE Racing Big Ripper 29

Big. Bad. Red. Bone Stock. BMX. Bike. The one, the only, Big Ripper 29

Picked this up, along with a few other bikes, at the closing of our local Performance Bike. My brother took a liking to it, so it's going to him. He's stoked to have it.

This thing is stunning in red. It's bone stock, just as it left the bike shop. Decals, reflectors and chain guard - pads on backwards and all the misalignment's and maladjustment's intact. In it's native glory for it's Museum debut.

I don't think my brother will make many changes. He's planning, as I am with my blue 2018, to ride it as is for the most part. He is planning to tune it to his liking and remove all the reflector, chain guard and safety decal junk. Pegs will be gone too!

Hope you enjoy. Thanks for checking it out.


From the SE Bikes site:

Features:

  • Retro 6061 aluminum Big Ripper frame with floval tubing and looptail rear end
  • Full Cr-Mo Landing Gear forks
  • Cr-Mo Big Honkin’ cruiser bars
  • Double-wall rims with sealed bearing high-flange hubs
  • SE 3-pc V-Ridge cranks with alloy SE sprocket
  • Authentic ODI Mushroom II grips with donuts
  • Vee Tire x SE Racing Speedster 29” x 2.10” tires
  • SE Flyer seat with bottle opener
  • SE Racing Lightning Bolt Snap padset
  • SE Racing Rad Plate and SE Wheelie pegs
  • 29.6 lbs


SPECS:

  • COLOR(S): Shiny Red
  • FRAME: 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm Euro Bottom Bracket, Retro Dropouts
  • FORK: Landing Gear, Full Cr-Mo
  • CRANKSET: SE V-Ridge 3-pc Cr-Mo, Cranks, 175mm, Sealed Euro Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 33T Alloy SE Racing Sprocket
  • PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
  • CHAIN: KMC S1
  • WHEELSET: Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
  • TIRES: Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
  • BRAKESET: Tektro 837-AL V-Brake, Slick Cable
  • BRAKE LEVERS: FSA NO.42/ACB Sealed 1-1/8"-1.5" Tapered, Integrated Headset
  • HEADSET: Tange 1-1/8" Threadless
  • HANDLEBAR: Big Honkin' Cr-Mo Cruiser Bar, 29" x 6", 10° Backsweep, 1° Upsweep
  • STEM: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
  • GRIPS: Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ SE Donuts,
  • SEAT: SE Flyer Seat w/ Custom SE Bottle Opener Brace
  • SEATPOST: Micro-Adjust Alloy, 27.2mm
  • SEAT CLAMP: SE Racing Champ Clamp, Alloy, 31.8mm Inner Diameter
  • ACCESSORIES: SE Racing Rad Number Plate, Lightning Bolt Snap Padset, Alloy Valve Caps, SE Wheelie Pegs
  • WEIGHT: 29.6 lbs / 13.42 kgs

GEOMETRY:

  • TOP TUBE, ACTUAL: 23.6"
  • SEAT TUBE, CENTER TO TOP: 16.9"
  • SEAT TUBE ANGLE: 71°
  • HEAD TUBE ANGLE: 71°
  • CHAINSTAY LENGTH: 18"
  • WHEELBASE: 43.7"
  • BOTTOM BRACKET HEIGHT: 12"
  • STANDOVER: 30.5"
  • SUGGESTED RIDER SIZE: 5'5"+ (165cm+)
  • STEM: 55mm
  • HANDLEBAR WIDTH: 29"
  • CRANK: 175mm
  • WHEEL SIZE: 29"
  • SEAT POST DIAMETER: 27.2mm

Submitted by RadicalNick

  • All-Around
  • Company: SE Racing
  • Model: Big Ripper
  • Wheel Size: 29"
  • Headtube angle: 71
  • Seattube angle: 71
  • Toptube length: 23.6
  • Headtube size: 1-1/8"