BMX Bikes / S / SE Racing / 2018 SE Racing Big Ripper 29
2018 SE Racing Big Ripper 29

2018 SE Racing Big Ripper 29

Big. Bad. Blue. Bone Stock. BMX. Bike. The one, the only, Big Ripper 29

Always wanted one of these, and got a great deal on this one. 

It's bone stock, just as it left the bike shop. Decals, reflectors and chain guard - pads on backwards and all the misalignment's and maladjustment's intact. In it's native glory for it's Museum debut. 

I don't plan on making to many changes to this one, just gonna ride it as is. But I will tune it for me and remove all the reflector, chain guard and safety decal junk.

Hope you enjoy. Thanks for checking it out. 

From the SE Bikes site:

FEATURES:
  • Retro 6061 aluminum Big Ripper frame with floval tubing and looptail rear end
  • Full Cr-Mo Cowboy Cut forks
  • Cr-Mo Big Honkin'™ cruiser bars
  • Double-wall rims with sealed bearing high-flange hubs
  • SE 3-pc V-Ridge cranks with alloy SE sprocket
  • Authentic ODI Mushroom II grips with donuts
  • SE Racing Bear Trap pedals
  • Vee Tire x SE Racing Speedster 29" x 2.10 tires
  • SE Racing Lightning Bolt padset
  • All-new SE Racing Rad Plate and SE Wheelie pegs
  • 28.4 lbs

SPECS:

  • COLOR(S): Blue
  • FRAME: 6061 Aluminum Floval Tubing, Looptail Rear End, Retro Dropouts
  • FORK: Cowboy Cut Landing Gear, Full Cr-Mo
  • CRANKSET: SE 3-pc Cr-Mo, SE V-Ridge Cranks, 175mm, Sealed Euro Bottom Bracket, 33T Alloy SE Racing Sprocket
  • PEDALS: SE Racing Bear Traps
  • CHAIN: KMC Z410A
  • WHEELSET: Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 15T Freewheel, Stainless Spokes
  • TIRES: Vee Tire Co x SE Racing Speedster, 29" x 2.10" Front & Rear
  • BRAKESET: Tektro 837-AL V-Brake, Slick Cable
  • BRAKE LEVERS: Tektro 316A, 2-Finger Alloy
  • HEADSET: Tange 1-1/8" Threadless
  • HANDLEBAR: Big Honkin' Cr-Mo Cruiser Bar, 29" x 6"
  • STEM: Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach
  • GRIPS: Special Edition ODI Mushroom II Dual-Ply Grips w/ SE Donuts, Made in USA
  • SEAT: SE Flyer Seat w/ Custom SE Bottle Opener Brace
  • SEATPOST: Micro-Adjust Alloy, 27.2mm
  • ACCESSORIES: SE Racing Rad Plate, Lightning Bolt Padset, Alloy Valve Caps, SE Wheelie Pegs
  • WEIGHT: 28.4 lbs / 12.88 kgs

GEOMETRY:

  • TOP TUBE, ACTUAL: 23.6"
  • SEAT TUBE, CENTER TO TOP: 16.9"
  • SEAT TUBE ANGLE: 71°
  • HEAD TUBE ANGLE: 71°
  • CHAINSTAY LENGTH: 18"
  • WHEELBASE: 43.7"
  • BOTTOM BRACKET HEIGHT: 12"
  • STANDOVER: 30.5"
  • SUGGESTED RIDER SIZE: 5'5"+ (165cm+)
  • STEM: 55mm
  • HANDLEBAR WIDTH: 29"
  • CRANK: 175mm
  • WHEEL SIZE: 29"
  • SEAT POST DIAMETER: 27.2mm

Submitted by RadicalNick

  • All-Around
  • Company: SE Racing
  • Model: Big Ripper
  • Wheel Size: 29"
  • Headtube angle: 71
  • Seattube angle: 71
  • Toptube length: 23.6
  • Headtube size: 1-1/8"