BMX Bikes / S / S&M Bikes / 2010 S&M Speedwagon (Prototype)

2010 S&M Speedwagon (Prototype)
 

2010 S&M Speedwagon (Prototype)

One of the first S&M Speedwagon prototype frames! Approximately 10 of these were made for testing. This one went to Jared "The Jet" Garcia. SN 121001

After seeing this bike on the local Craigslist, I decided to contact the seller and take a look at it (2/24/2014). I learned that the seller was a good friend of Jared "The Jet" Garcia (factory Supercross, A Pro racer) and had received this bike from Jared as a birthday present. Now in college (he's actually the first guy to appear in this video - https://www.youtube.com/watch?v=x-F6_w61s6A), the seller needed some cash, so he put the bike on the chopping block and I gladly bought it. The seller thought that the frame was an S&M 38 Special, but after I took it home, I realized that it was one of the first S&M Speedwagon prototype frames (http://bmxmuseum.com/bikes/sandm/61974)! Approximately 10 of these frames were made for testing. With the exception of the stem, brakes, brake lever, seat, seat post, and seat post clamp (the seller added these), all of the parts on this bike came from Jared Garcia.

Submitted by pharv85

  • Race
  • Company: S&M Bikes
  • Model: Speedwagon
  • Wheel Size: 20"
  • Toptube length: 21.5
  • Headtube size: Internal
  • Details Frame: 2010 S&M Speedwagon Prototype (21.5" top tube; 100% 4130 chromoly tubes, European bottom bracket, V-brake mounts, integrated headset compatible, trans black) Fork: Elevn 7.0 LT Pro (1-1/8" threadless, 20", 31mm offset, 4130 heat-treated chromoly, 1-pc machined triple-butted steerer tube, alloy compression cap (25x1.5mm compression bolt), ultra tapered fork legs made from double-butted tubing, CNC machined dropouts with multiple cutouts to further reduce weight, 170 lb rider weight limit, Intended for race use only, 315mm height, 172mm steerer tube length, black w/ white decals) 27.6 oz., $134.99 Handlebars: Supercross Huge (100% heat-treated and seamless 4130 chromoly, 13-butted tubing "reduces weight in all the right places without sacrificing strength", 8.25" rise, 28" wide, 6 deg. backsweep, 2 deg. upsweep, 5.75" crossbar height, 11" crossbar width, black) 27.7 oz., $56.99 Stem: Odyssey TDFL (1-1/8", 53mm reach, 6061-T6 aluminum, CNC machined, front-load design, Tom Dugan's signature stem, 31.5mm stack height, 8x1.25mm bolts, black) 11.2 oz., $64.99 Headset: FSA Impact (Integrated Campy style, 30.0mm 7075 alloy crown race, 42.0mm OD bearing, Hybrid ACB bearings) $32.95 (aprox.) Headset Cap: Elevn (built into the fork, black w/ white decals) Grips: ODI (made in USA, black) Bar Ends: ODI (plastic) Seat: Supercross Pro Pivotal (high density Nylon base, padded top, synthetic leather covering, Kevlar sides "to prevent rips", black) 9.5 oz., $39.99 Seat Post: ??? (Pivotal, 27.2mm, aluminum, black) Seat Post Clamp: Salsa Quick Release(30.0mm, aluminum, sliver) Cranks: Profile GDH Spline Drive (175 mm bossless chromoly arms) 27.7 oz. (arms & spindle, w/o BB), $164.99 Spindle: Profile (6" long, 19mm wide, GDH chromoly, hollow chromoly bolts) Bottom Bracket: Profile External Euro (19mm, aluminum, black) 5.6 oz., $59.99 Sprocket: Profile Elite Race Spline-Drive (44T, 3/32" teeth, 6mm thick, 19mm bore w/ chromoly 48 Spline Insert, CNC machined in the USA, 7075 aluminum with a tri-circle design, offset teeth for better chain alignment, black) 6.0 oz. (44T), $86.99 Chain: Shimano CN-HG40 (1/2" long x 3/32" wide, silver) Chain Tensioners: Bulletproof? (black) Pedals: S&M One-O-One (9/16", aluminum, black) Front Hub: Éclat (36H, sealed bearings, low flange, black w/ white decal) Rear Hub: Supercross Quick Twitch Cassette (36H, steel axle nuts, black) Cog: Supercross (16T) Front Rim: Éclat (6066 T6 alloy double wall rim, 36H, flash welded seam, brown) Rear Rim: Alienation Delinquent (6061-T6 aluminum double-wall rim with 3 hollow chambers, welded seam, angled spoke holes to insure a stiffer wheel, 33mm wide and 16.2mm, 406mm bead diameter, red) 16.0 oz., $64.99 Tires: Kenda Konversion Folding (wire bead, 75-100 psi, 60 TPI casing, 20 x 1.75" front, 20 x 1.65" rear) 13.9 oz. (20 x 1.75") and 12.9 oz. (20 x 1.65"), $28.99 (each) Tubes: generic w/ Schrader valve (20" x 1.75-2.125") Brake Lever: Shimano DXR V-Lever (silver body w/ black blade) 3.0 oz., $44.99 Brakes: Shimano Deore V-brake (black) Brake Pads: Kool Stop BMX (white)

View Cart →