My 1985 Dyno D30 Project 
#1 2012-04-12 8:31am
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
My 1985 Dyno D30 Project
I got this bike last year from a good friend of mine who said he wasn't into freestyle bikes. Thanks JohnnyO!
It had D30 F&F , GT Pro bars and some OG white coaster brake Skyways.
I planned to build it to ride it and was going to use the coaster brake Skyways.
Then I got it painted (the first time) and the OG Skyways looked yellow compared to the frame. I have a brand new set of white freewheel skyways for another build I'm doing, but it may go a different direction now, so I decided to use the bright white Skyways.
Now the Dyno Summer Buildoff comes along and I got my but in gear. Then "Spring Brake" came along and I need to get this done! 
The tear down.
First paint job.
Last edited by AirInk (2012-04-24 8:29pm)
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#2 2012-04-12 4:24pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Some of the parts for the build.
Last edited by AirInk (2012-04-20 1:00pm)
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#3 2012-04-12 4:28pm
- Darkman
- Pro Memberkindabummedaboutthis
- From: Southern, NH
- Registered: 2008-08-02
- Posts: 875
- Bikes: 9
- For Sale
- Feedback: 600
Re: My 1985 Dyno D30 Project
Yup, this is gonna go in my "Fav's". 
Can't wait to see it at the Spring Brake.
"If your gonna go out, go all out. If your gonna go down, go down in flames."
Offline
#4 2012-04-12 4:37pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
I still don't have a headset, or cranks or bb. I dont know what I'm doing in the way of cranks yet. I want OG 3 piece, but my budget says new 3 piece. I can always change them out down the road.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#5 2012-04-12 7:18pm
- tobin
- Expert
- From: Northeast
- Registered: 2010-03-01
- Posts: 542
- Bikes: 5
- Feedback: 4800
Re: My 1985 Dyno D30 Project
Please get better pedals
Offline
#6 2012-04-12 7:25pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
tobin wrote:
Please get better pedals
This is a budet build. What do you recomend?
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#7 2012-04-12 7:55pm
- HuGT1
- Member
- Registered: 2009-05-05
- Posts: 34
- Bikes: 1
- Feedback: 1000
Re: My 1985 Dyno D30 Project
Nice! Subscribed.
Offline
#8 2012-04-12 8:28pm
- FRESSTYLE FREEK
- Pro Member(fantstik Spellr)
- From: Fountain Valley, CA
- Registered: 2007-06-28
- Posts: 11804
- Bikes: 43
- For Sale
- Feedback: 6800
Re: My 1985 Dyno D30 Project
AirInk wrote:
I still don't have a headset, or cranks or bb. I dont know what I'm doing in the way of cranks yet. I want OG 3 piece, but my budget says new 3 piece. I can always change them out down the road.
go with white retro flite cranks for now. looks like a killer build!
Show bikes are nice. but bikes wear ment to be Petaled
YES I RIDE A PINK BIKE!! WANT TO MAKE SOME THING OUT OF IT!
Offline
#9 2012-04-12 8:29pm
- FRESSTYLE FREEK
- Pro Member(fantstik Spellr)
- From: Fountain Valley, CA
- Registered: 2007-06-28
- Posts: 11804
- Bikes: 43
- For Sale
- Feedback: 6800
Re: My 1985 Dyno D30 Project
AirInk wrote:
tobin wrote:
Please get better pedals
This is a budet build. What do you recomend?
any good ceap priced Shimano DX copy. lose the race looking pedalS
Show bikes are nice. but bikes wear ment to be Petaled
YES I RIDE A PINK BIKE!! WANT TO MAKE SOME THING OUT OF IT!
Offline
#10 2012-04-12 8:36pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
When I got my mallet stem it looked like this.. Sandblasted and beat.
After
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#11 2012-04-13 4:16pm
- Darkman
- Pro Memberkindabummedaboutthis
- From: Southern, NH
- Registered: 2008-08-02
- Posts: 875
- Bikes: 9
- For Sale
- Feedback: 600
Re: My 1985 Dyno D30 Project
What did you use to smooth it out like that? It looks wicked nice now!
"If your gonna go out, go all out. If your gonna go down, go down in flames."
Offline
#12 2012-04-13 4:24pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
A file for the big nicks and 3 caoats of primer sanded in between each coat, 2 coats of color and 3 coats of clear wet sanded and polished.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#13 2012-04-13 4:47pm
- James Vigil
- Expert
- From: California
- Registered: 2008-11-02
- Posts: 940
- Bikes: 2
- Feedback: 24000
Re: My 1985 Dyno D30 Project
But I agree on the pedals. Get some freestyle pedals and maybe some Primo Powerbite cranks. Can't wait to see finished product. Good luck with your build
Aw, we better start runnin' Eyeball, they got dibs!
Offline
#14 2012-04-14 3:59pm
- GuitarDinger
- Intermediate
- From: Burlington, IN
- Registered: 2012-03-26
- Posts: 306
- Bikes: 3
- Feedback: 300
Re: My 1985 Dyno D30 Project
Looks great so far................I'll be watching. I just picked up another Dyno and I'm gonna do the same thing.
Offline
#15 2012-04-14 9:01pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Ok the pedals are out.
Searching for another pair.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#16 2012-04-20 1:10pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Finally got my frame back today. After him charging me 50% more than his original quote, the first paint job sucked! There were bare spots with no paint and most of the clear was dry and orange peel. I went to pick it up today and he wanted even moremoney for fixing his bad workmanship. WTF! 
So I have the frame back and was told to never go in his shop again, He may have been concenrned that I would actually put the frame where I said. Do not go to Stoli's Autobody in Orange, MA. His work is crap and his bussiness practices are worse.
On with the build.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#17 2012-04-20 1:33pm
- HuGT1
- Member
- Registered: 2009-05-05
- Posts: 34
- Bikes: 1
- Feedback: 1000
Re: My 1985 Dyno D30 Project
Dude, that sucks, well at least you have it back now 
Offline
#18 2012-04-24 6:28pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
After a few hours of sanding and polishing, I felt it was good enough to put on the decals.
Sorry the pictures suck, cameraphone. 
I still need to find a black headset and figure out my cranks.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#19 2012-04-24 7:00pm
- Darkman
- Pro Memberkindabummedaboutthis
- From: Southern, NH
- Registered: 2008-08-02
- Posts: 875
- Bikes: 9
- For Sale
- Feedback: 600
Re: My 1985 Dyno D30 Project
Looks great with the decals on it!
I got a black Dyno seat I ain't using... 
Would match those grips nicely...
"If your gonna go out, go all out. If your gonna go down, go down in flames."
Offline
#20 2012-04-24 7:05pm
- Darkman
- Pro Memberkindabummedaboutthis
- From: Southern, NH
- Registered: 2008-08-02
- Posts: 875
- Bikes: 9
- For Sale
- Feedback: 600
Re: My 1985 Dyno D30 Project
It's not "Mint" or "Nos" though... 
Not sure it would go good on that pretty bike of yours.
"If your gonna go out, go all out. If your gonna go down, go down in flames."
Offline
#21 2012-04-24 7:09pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Darkman wrote:
Looks great with the decals on it!
I got a black Dyno seat I ain't using...
Old style or new?
This is the newer 90's version
Or like the one on this 85?
http://bmxmuseum.com/forums/viewtopic.php?id=417893
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#22 2012-04-24 7:19pm
- Darkman
- Pro Memberkindabummedaboutthis
- From: Southern, NH
- Registered: 2008-08-02
- Posts: 875
- Bikes: 9
- For Sale
- Feedback: 600
Re: My 1985 Dyno D30 Project
Too new for you. Its the 90's style.
"If your gonna go out, go all out. If your gonna go down, go down in flames."
Offline
#23 2012-04-24 8:13pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Thanks for the offer. I have a new Dominator for it, but would have passed on it for an 80's Dyno seat in black for sure.
Last edited by AirInk (2012-04-24 8:15pm)
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline
#24 2012-04-24 8:22pm
- h20-50
- Pro Member
- From: San Antonio, TX
- Registered: 2011-01-20
- Posts: 598
- Bikes: 5
- For Sale
- Feedback: 5500
Re: My 1985 Dyno D30 Project
AirInk wrote:
Thanks for the offer. I have a new Dominator for it, but would have passed on it for an 80's Dyno seat in black for sure.
http://i1210.photobucket.com/albums/cc4 … parts2.jpg
I have an 87' Dyno seat in white, damn good condition too if your interested.
LOOKING FOR
Nothing right now!
Offline
#25 2012-04-26 1:34pm
- AirInk
- McMike
- From: North Quabbin, MA
- Registered: 2011-07-12
- Posts: 1389
- Bikes: 10
- Feedback: 1700
- Website
Re: My 1985 Dyno D30 Project
Cranks. For now, I will find an old school set at sompe point, but I want to get this finished.
Never argue with a fool, for they may be doing the same.
"When is the last time you did something for the first time?"
David Lee Roth
Offline