BMXmuseum.com Forums

AllanG · #551

Things have slowed right down for me, all based on not wanting to break up an 87 compe rider for it's forks

So this is where i'm at

FRESSTYLE FREEK · 2012-04-19 10:09am

AllanG wrote:
Things have slowed right down for me, all based on not wanting to break up an 87 compe rider for it's forks

So this is where i'm at

http://i534.photobucket.com/albums/ee34 … af884f.jpg

if you do not mined the none factory stock look. pay it foword and I got a 95 Dyno slame fork. with 990 AD brake mounts. there chromed but you could paint them white. if it helps you finish there yours!

AirInk · 2012-04-19 11:20am

Seems like a lot of white builds going on here.

oozyooz · 2012-04-19 3:43pm

I just wake up early for work and check in on the thread before I go in. But as far as the class being on the list I did not bother to keep what class anybody entered in mind because that is what the submission thread is for the one where you post before, during, and after photos of you're ride and what class you're putting it in! I'm just keeping record of the bikes entered. I must say I see some exclusive rides being built here, I can't wait to see em done

greg zts wrote:
hey man, don't you sleep?

And on a side note, is there anyway you can put what class everyone is entering. I know that is a hassle, but for a guy that doesn't sleep, should be no problem!!!

greg

Last edited by oozyooz (2012-04-19 6:56pm)

greg zts · 2012-04-19 4:32pm

Ohhhhh, i see. U are gonna make us do all the work with picking our own class!!!! Man, some people!!!!

Lol

Greg

oozyooz · 2012-04-19 4:36pm

It is what it is

h20-50 · 2012-04-19 5:12pm

I just finished my 98' Detour build today, I will post photos tomorrow as I had to pull it from the build-off because it was "technically" already built.

whitebread · 2012-04-19 7:05pm

If the buildoff MC is posting pics, I guess I will too.
Pre-decal dry run this evening so I can figure out where I'm headed with the black, white & chrome.
Really wanting some real Dyno pretzels still got a few months

Last edited by whitebread (2012-04-19 7:06pm)

greg zts · 2012-04-19 7:25pm

pm sent whitebread!!!

greg

Woodchips78 · 2012-04-19 7:53pm

AllanG wrote:
Things have slowed right down for me, all based on not wanting to break up an 87 compe rider for it's forks

So this is where i'm at

http://i534.photobucket.com/albums/ee34 … af884f.jpg

That bike is sweet!

AllanG · 2012-04-19 9:21pm

FRESSTYLE FREEK wrote:
if you do not mined the none factory stock look. pay it foword and I got a 95 Dyno slame fork. with 990 AD brake mounts. there chromed but you could paint them white. if it helps you finish there yours!

That's an awesome offer but i'd like to keep it as 87 as possible, thanks anyway

h20-50 · 2012-04-19 9:24pm

AllanG wrote:
Things have slowed right down for me, all based on not wanting to break up an 87 compe rider for it's forks

So this is where i'm at

http://i534.photobucket.com/albums/ee34 … af884f.jpg

Someone not too long ago had pro compe forks for sale in the old section, can't remember who though.....

AllanG · 2012-04-19 9:26pm

Woodchips78 wrote:
That bike is sweet!

thanks

It's a NOS frame from the Earl stash, everything in the pic bar the wheels are NOS but i'm afraid i'll have to strip this rider for it's forks to finish the whole thing

AllanG · 2012-04-19 9:27pm

h20-50 wrote:
Someone not too long ago had pro compe forks for sale in the old section, can't remember who though.....

I remember those, they were powdered black but I couldn't find the link

FRESSTYLE FREEK · 2012-04-19 10:40pm

h20-50 wrote:
AllanG wrote:
Things have slowed right down for me, all based on not wanting to break up an 87 compe rider for it's forks

So this is where i'm at

http://i534.photobucket.com/albums/ee34 … af884f.jpg
Someone not too long ago had pro compe forks for sale in the old section, can't remember who though.....

yup they did have! I bought them. there on this ride.

Woodchips78 · 2012-04-20 12:32am

Just opened the package which contained my decals for pit build. I found out that they sent me the wrong decals. They sent me red and yellow VFR decals, not the blue and white ones i need. Damn it!

oozyooz · 2012-04-20 3:20am

That sucks

Woodchips78 wrote:
Just opened the package which contained my decals for pit build. I found out that they sent me the wrong decals. They sent me red and yellow VFR decals, not the blue and white ones i need. Damn it!

h20-50 · 2012-04-20 1:37pm

Here is my 98' Detour I just finished. I added the 3 piece GT profile cranks, pacman pegs, tuf neck chainring, tech 77 levers, painted the brakes, and NOS slammer bars. I pulled this from the contest because it was already built, but let it be motivation for yall to finish yours so I can see them!

Last edited by h20-50 (2012-04-20 1:39pm)

AirInk · 2012-04-20 1:48pm

I got my frame back from paint again today. I need someone with a steady hand to apply the decals now.

AirInk · 2012-04-20 1:50pm

h20-50 wrote:
Here is my 98' Detour I just finished. I added the 3 piece GT profile cranks, pacman pegs, tuf neck chainring, tech 77 levers, painted the brakes, and NOS slammer bars. I pulled this from the contest because it was already built, but let it be motivation for yall to finish yours so I can see them!
http://img849.imageshack.us/img849/5761/dsc00849q.jpg
http://img268.imageshack.us/img268/9611/dsc00853bo.jpg
http://img209.imageshack.us/img209/6898/dsc00852v.jpg
http://img809.imageshack.us/img809/2534/dsc00851cs.jpg
http://img135.imageshack.us/img135/1412/dsc00842m.jpg
http://img204.imageshack.us/img204/6919/dsc00838qp.jpg

I love those Profile GT cranks. I know where there is a set, but seperating them from their owner may be a challenge.

h20-50 · 2012-04-20 2:31pm

AirInk wrote:
h20-50 wrote:
Here is my 98' Detour I just finished. I added the 3 piece GT profile cranks, pacman pegs, tuf neck chainring, tech 77 levers, painted the brakes, and NOS slammer bars. I pulled this from the contest because it was already built, but let it be motivation for yall to finish yours so I can see them!
http://img849.imageshack.us/img849/5761/dsc00849q.jpg
http://img268.imageshack.us/img268/9611/dsc00853bo.jpg
http://img209.imageshack.us/img209/6898/dsc00852v.jpg
http://img809.imageshack.us/img809/2534/dsc00851cs.jpg
http://img135.imageshack.us/img135/1412/dsc00842m.jpg
http://img204.imageshack.us/img204/6919/dsc00838qp.jpg
I love those Profile GT cranks. I know where there is a set, but seperating them from their owner may be a challenge.

They are worth the chellenge, I got lucky with these. They were used but after a vinegar bath and polish, they cleaned up super nice.

oozyooz · 2012-04-20 4:44pm

h20-50 wrote:
AirInk wrote:
h20-50 wrote:
Here is my 98' Detour I just finished. I added the 3 piece GT profile cranks, pacman pegs, tuf neck chainring, tech 77 levers, painted the brakes, and NOS slammer bars. I pulled this from the contest because it was already built, but let it be motivation for yall to finish yours so I can see them!
http://img849.imageshack.us/img849/5761/dsc00849q.jpg
http://img268.imageshack.us/img268/9611/dsc00853bo.jpg
http://img209.imageshack.us/img209/6898/dsc00852v.jpg
http://img809.imageshack.us/img809/2534/dsc00851cs.jpg
http://img135.imageshack.us/img135/1412/dsc00842m.jpg
http://img204.imageshack.us/img204/6919/dsc00838qp.jpg
I love those Profile GT cranks. I know where there is a set, but seperating them from their owner may be a challenge.
They are worth the chellenge, I got lucky with these. They were used but after a vinegar bath and polish, they cleaned up super nice.

Woodchips78 · 2012-04-20 5:32pm

Yep I love those Profile Gt cranks, I have 2 sets of them. One on my 90 detour and a blue powdered set on the wife's nitro 24" cruiser in this build off.

inkedup · 2012-04-20 6:39pm

Woodchips78 wrote:
Yep I love those Profile Gt cranks, I have 2 sets of them. One on my 90 detour and a blue powdered set on the wife's nitro 24" cruiser in this build off.

+me! Got me a pair on my performer, seriously like them more than my group1's and my flights...

oozyooz · 2012-04-21 5:50am

Trying to figure out what route I'm going as far as cranks go

Login

Summer of 2012 80's Dyno build off entry submission

Re: Summer of 2012 80's Dyno build off entry submission

#552 2012-04-19 10:09am

Re: Summer of 2012 80's Dyno build off entry submission

AllanG wrote:

#553 2012-04-19 11:20am

Re: Summer of 2012 80's Dyno build off entry submission

#554 2012-04-19 3:43pm

Re: Summer of 2012 80's Dyno build off entry submission

greg zts wrote:

#555 2012-04-19 4:32pm

Re: Summer of 2012 80's Dyno build off entry submission

#556 2012-04-19 4:36pm

Re: Summer of 2012 80's Dyno build off entry submission

#557 2012-04-19 5:12pm

Re: Summer of 2012 80's Dyno build off entry submission

#558 2012-04-19 7:05pm

Re: Summer of 2012 80's Dyno build off entry submission

#559 2012-04-19 7:25pm

Re: Summer of 2012 80's Dyno build off entry submission

#560 2012-04-19 7:53pm

Re: Summer of 2012 80's Dyno build off entry submission

AllanG wrote:

#561 2012-04-19 9:21pm

Re: Summer of 2012 80's Dyno build off entry submission

FRESSTYLE FREEK wrote:

#562 2012-04-19 9:24pm

Re: Summer of 2012 80's Dyno build off entry submission

AllanG wrote:

#563 2012-04-19 9:26pm

Re: Summer of 2012 80's Dyno build off entry submission

Woodchips78 wrote:

#564 2012-04-19 9:27pm

Re: Summer of 2012 80's Dyno build off entry submission

h20-50 wrote:

#565 2012-04-19 10:40pm

Re: Summer of 2012 80's Dyno build off entry submission

h20-50 wrote:

AllanG wrote:

#566 2012-04-20 12:32am

Re: Summer of 2012 80's Dyno build off entry submission

#567 2012-04-20 3:20am

Re: Summer of 2012 80's Dyno build off entry submission

Woodchips78 wrote:

#568 2012-04-20 1:37pm

Re: Summer of 2012 80's Dyno build off entry submission

#569 2012-04-20 1:48pm

Re: Summer of 2012 80's Dyno build off entry submission

#570 2012-04-20 1:50pm

Re: Summer of 2012 80's Dyno build off entry submission

h20-50 wrote:

#571 2012-04-20 2:31pm

Re: Summer of 2012 80's Dyno build off entry submission

AirInk wrote:

h20-50 wrote:

#572 2012-04-20 4:44pm

Re: Summer of 2012 80's Dyno build off entry submission

h20-50 wrote:

AirInk wrote:

h20-50 wrote:

#573 2012-04-20 5:32pm

Re: Summer of 2012 80's Dyno build off entry submission

#574 2012-04-20 6:39pm

Re: Summer of 2012 80's Dyno build off entry submission

Woodchips78 wrote:

#575 2012-04-21 5:50am

Re: Summer of 2012 80's Dyno build off entry submission

Board footer