You are not logged in.
Powdercoaters & painters: Post your contacts 
#52 2008-08-20 1:03pm
Re: Powdercoaters & painters: Post your contacts
http://tinmans.net/
i have been using a guy here in biloxi mississippi. his name is leo. he runs a one man shop, and does outstanding work. so far he has done 4 frames, stems, seat posts, countless small parts, and some motorcycle frame, forks, and assorted small parts for me.
the quality is excellent, turn around time is fast., and his prices are low, low, low!!!!!!!!!
look in my bikes, as i am adding more of his stuff all the time.
http://bmxmuseum.com/bikes/bmx_products_inc/15354
http://bmxmuseum.com/bikes/mongoose/15510
right now, he has a profile champ, and an old school mongoose of mine. he is doing them both in a bronze. both are the same, but i'm only keeping the profile. the goose is for my cousin coming back from iraq.
i highlly reccommend leo, he does flawless work, tapes off all the things that need to be taped, and like i said, his prices are low.
http://tinmans.net/
"An armed man will kill an unarmed man with monotonous regularity" said Clint Smith.
i used to be trk2ajk
i need drive technologies 43t sprocket, fly or revenge brakes
Offline
#53 2008-08-23 10:11am
- urspeedracer
- Museum Newbie
- Registered: 2008-08-05
- Posts: 16
- Feedback : 0
Re: Powdercoaters & painters: Post your contacts
weshole wrote:
I had my Skyway frame, fork, bars, and some small parts painted By Eric Pride (Ohioguy31) at...
Prides Body Shop
Belpre, Oh
740-423-8223
Paid $150.00 shipped for the work. Sent him all parts FULLY STRIPPED and ready to prep n paint.
May be more depending on condition. He was great to deal with and was ultra fast both on communication and turnaround.
http://i15.photobucket.com/albums/a392/ … 0208-1.jpg
http://i15.photobucket.com/albums/a392/ … 0204-2.jpg
That's amazing work, and for that price! I know i'll be hitting him up for my next resto job. 
Offline
#54 2008-08-24 8:03pm
- capriceguy
- Museum Newbie
- Registered: 2008-08-24
- Posts: 4
- Feedback : 0
Re: Powdercoaters & painters: Post your contacts
how improtent is it to keep the right color on the bike i believe i have a 1995 purple rain
dyno compe is this a rare bike? its almost mint but was thinking of changing color
any segestions ?
Offline
#55 2008-08-24 10:38pm
Re: Powdercoaters & painters: Post your contacts
It isnt' like cars, where bikes come with paint codes in the serial number. Its not a rare bike as Dynos were produced in number but if the paint looks good why change it. Keep you eyes out for one with bad paint, buy it cheap and get that one custom painted would be my advice.
***FYI*** alot of Old School bikes were Powder Coated. Check the old ads, bike tests before Painting to make sure it was painted BITD and not Powder Coated. If you are going for authenticity.
Erick Weinstetter BMXr from 1978-2001, 2005 Raced Penn-1, District G, PA01, CA-14, NJ-4
Project: 1983 SE Quadangle 42.5% complete (A recreation of my last Quad)
Project: 1985 Profile Cruiser 6% complete (LOL. A recreation of my Profile)
The BMX Life
Offline
#56 2008-08-25 6:23pm
- bmxguru1968
- Member
- From: Farmington,Il
- Registered: 2008-02-02
- Posts: 73
- Bikes: 20
- Feedback : 0
Re: Powdercoaters & painters: Post your contacts
does anybody know anybody in central illinois that powders well? just curious...
Offline
#57 2008-09-12 11:10am
Re: Powdercoaters & painters: Post your contacts
I WANT TO PAINT MY OWN STUFF. AND I WANT TO KNOW WHAT THAT LIGHT BLUE PAINT ON THE QUAD ON LOU'S POST ON THE FIRST PAGE FROM 2007. WELL ANYWAY PAINTCODES AND A PLACE TO FIND THEM WOULD BE GREAT. ANYBODY
Offline
#58 2008-09-23 5:31pm
- BMXRider38
- Pro Member
- Registered: 2008-09-14
- Posts: 292
- Bikes: 2
- Feedback : 7
Re: Powdercoaters & painters: Post your contacts
Any places near alabama?
Offline
#59 2008-09-24 10:34am
Re: Powdercoaters & painters: Post your contacts
Orange County CA
Good bunch of guys.
714-835-7395
949-350-5154
Jason Langhoff
jtml4200@gmail.com
deluxepowdercoating.com
$75 for f/f
Last edited by irvinec32 (2008-11-11 2:03pm)
Wanted: 1 front white tuff II mag. 1 set of used chain ring bolts. Cheap used yellow seats and grips.
Offline
#60 2008-09-24 11:47am
Re: Powdercoaters & painters: Post your contacts
Premiere Coatings here in Colorado did a great job on my Schwinn Pro Stock 2. Will post pics once I put it all together.
Heads by the score take flight incite a war
Chicks hit the floor, diehard fans demand more
Behold the bold soldier, control the globe slowly
Proceeds to blow swingin swords like Shinobi
Offline
#61 2008-09-24 8:56pm
Re: Powdercoaters & painters: Post your contacts
Can you powdercoat over Chrome? I have a chrome frame thats in real good shape but would rather have it in a color.
" ...and Dangerous Dave samples the Soil... " by Jim McMahon Elgin BMX late 90's
Offline
#62 2008-09-24 9:19pm
Re: Powdercoaters & painters: Post your contacts
mine was done over chrome. If it is not flaking, you should be ok.
Wanted: 1 front white tuff II mag. 1 set of used chain ring bolts. Cheap used yellow seats and grips.
Offline
#63 2008-09-24 9:33pm
Re: Powdercoaters & painters: Post your contacts
I have a couple of Redline frames that are powder coated over chrome on the front triangle. Powder coat is even better then paint over chrome, it's solid, you shouldn't have any problems.
Offline
#64 2008-09-27 9:58am
Re: Powdercoaters & painters: Post your contacts
trk2ajk wrote:
http://tinmans.net/
i have been using a guy here in biloxi mississippi. his name is leo. he runs a one man shop, and does outstanding work. so far he has done 4 frames, stems, seat posts, countless small parts, and some motorcycle frame, forks, and assorted small parts for me.
the quality is excellent, turn around time is fast., and his prices are low, low, low!!!!!!!!!
look in my bikes, as i am adding more of his stuff all the time.
http://bmxmuseum.com/bikes/bmx_products_inc/15354
http://bmxmuseum.com/bikes/mongoose/15510
right now, he has a profile champ, and an old school mongoose of mine. he is doing them both in a bronze. both are the same, but i'm only keeping the profile. the goose is for my cousin coming back from iraq.
i highlly reccommend leo, he does flawless work, tapes off all the things that need to be taped, and like i said, his prices are low.
http://tinmans.net/
Dude, your mongoose is sick...
Offline
#65 2008-09-28 3:28pm
Re: Powdercoaters & painters: Post your contacts
Benny1 wrote:
Leon's Powdercoating in Oakland, CA
http://www.leonspowdercoating.com/
$90 for frame + fork: media blasting (not sand) & color
Benny1 appreciate it. Cool. I was just about to start calling every bodyshop in the Norcal area. Thanks for saving me some aggrevation and daytime minutes.
Robdawg
Offline
#66 2008-10-10 3:30pm
- dontfeartheripper
- Pro Member
- From: OAK CREEK, WI
- Registered: 2008-09-18
- Posts: 1607
- Bikes: 1
- Feedback : 72
Re: Powdercoaters & painters: Post your contacts
looking for powd. in wisconsin?
LOOKING FOR: FRONT GT SUPERLACE HUB IN CHROME,BLACK SHOTGUN SEAT, RED OR BLUE SHOTGUN SEAT
Offline
#68 2008-10-11 8:13am
Re: Powdercoaters & painters: Post your contacts
herring powder coating - Garland Tx.
Tell em Saylor sent ya.
saylor wrote:
damn bunch of end users. why do we even bother. so you can get email ?
ffs.
Offline
#69 2008-10-24 9:56am
Re: Powdercoaters & painters: Post your contacts
"Premiere Coatings" here in Colorado did the powder. "The Finished Part" bead blasted it.
Heads by the score take flight incite a war
Chicks hit the floor, diehard fans demand more
Behold the bold soldier, control the globe slowly
Proceeds to blow swingin swords like Shinobi
Offline
#70 2009-01-01 9:52am
Re: Powdercoaters & painters: Post your contacts
Great Dane Powder in Loyalhanna,Pa
They charged me $125 to powder my frame,forks,2 sets of profiles, a set of bars and a seat post which i found pretty cheap. My frame,forks and 1 set of profiles was already sandblasted so they didn't charge me for that. They were gonna charge me $175 until I got the frame,forks and profiles sandblasted then they lowered the price. I just dropped the frame off on tuesday and they said the turn around time should be about 2 weeks so I'll post some pics when I get it back
Wanted List S&M all over sheild seat...Anything S&M basically... I need 1 inch chrome seat post,22.2...Seat post clamp to fit a 1 inch frame...A 1 inch headset...grips that are era correct for a 92 Holmes...
GO STEELERS AND PENS!!!
[img]http://i174.photobucket.com/albums/w105/YamahaYFZRacer21/All7-30-5-1.jpg[/img]
Offline
#71 2009-02-04 10:14am
Re: Powdercoaters & painters: Post your contacts
For those in or around NJ, a real cool guy to work with is Mark from 'Mark Your Spot' powder coating. He's down in South Jersey, does great work at a very good price...
very easy to work with...
Check out his site http://www.markyourspotpowdercoating.com/
I need a Left (Non-Drive) 175mm Blue Sugino GT Crank arm.
Anyone help me out here??????
Also looking for a set of Araya 7b's....
Looking for a set of blue Dia-compe 1020 brakes....
Offline
#72 2009-11-04 11:47pm
Re: Powdercoaters & painters: Post your contacts
if you are out of michigan, near ann arbor or detroit, C&S powdercoating does great work. i am close friends with them. however, i think they are about to undergo a name change soon.
my 2001 dyno compe.
www.candspowdercoating.com
Offline
