BMXmuseum.com Forums

mongoosefreak · RSS feed for topic

I picked up the older Terrible 1 Barcode today With some pretty Sweet parts on it... I Am unsure of what year the bike is But I Do know it is a older one because it was hanging in the owners garage for Several years. The paint on the frame is not original. This is the parts run down.
Terrible 1 Barcode Frame
Standard Forks with a FSA Pig DH Pro headset
Terrible 1 Bars with Primo Grips
Primo Brake lever with a Dia compe 990 rear brake Kool Stop brake pads.
Profile 180mm 3 piece crank with S&M Pedals
S&M Redneck Stem
Volume 36 tooth Front Sprocket
KMC chain
Odyssey Aitken Seat
Unknown Seat post,and seat post clamp
Primo Hula Hoop rims
Primo Pro Sealed hubs with 14mm axles front and rear
Front tire is a Odyssey Elm Street tire,and the rear tire is a Primo Wall

ek210 · 2012-11-19 2:21pm

sick !

6s135 · 2012-11-19 2:52pm

Nice

tkBMX76 · 2012-11-19 3:44pm

I like it

mongoosefreak · 2012-11-19 4:48pm

Thanks everyone.. This bike is a bit on the heavy side, but the bike rides so Awesome! I am still trying to figure out what kind of seat post clamp is on the bike, and what year the frame is..

Last edited by mongoosefreak (2012-11-19 4:49pm)

rollan131 · 2012-11-19 5:29pm

looks like a maas build one from around 2001-2002

ChiefRidesInWoods · 2012-11-19 5:40pm

looks like a pretty solid rider...

how comfortable is that seat? i like the design.

mongoosefreak · 2012-11-19 5:49pm

ChiefRidesInWoods wrote:
looks like a pretty solid rider...

how comfortable is that seat? i like the design.

The seat is very comfortable. The Bike is extremely solid. The bike is so solid it is pretty much ready for war. The bike also rides as smooth as butter. A Very nice well built bike for sure...

RDB · 2012-11-19 6:05pm

ChiefRidesInWoods · 2012-11-19 6:10pm

plan on keeping it gold?

beej1968 · 2012-11-19 6:12pm

Might be a DK clamp. Nice bike, I love mine!

mongoosefreak · 2012-11-19 6:15pm

ChiefRidesInWoods wrote:
plan on keeping it gold?

No the gold paint is a bit chipped up and has got 2 go. Everything else will most likely remain on the bike.

mongoosefreak · 2012-11-19 6:19pm

beej1968 wrote:
Might be a DK clamp. Nice bike, I love mine!

I just looked at your bike. Very nice bike and build. Mine does not have a serial number either.

Jerry A Hutcher · 2012-11-20 3:26am

I agree 2002ish.. great bike!!

shreddingsince1980 · 2012-11-20 10:23am

Both the top and downtubes appear to be the same size diameter... 1.5"? If that's the case, the frame is closer to mid '04-05ish range.

Dannywhac · 2012-11-20 11:28am

Seat clamps a mid-school DK.

Have a look here (you have to click on the pdf) to see which version Barcode you've got

http://issuu.com/terribleone/docs/barcode_timeline

You sure they're Standard forks?

Last edited by Dannywhac (2012-11-20 11:37am)

milhous · 2012-11-20 12:07pm

Nice Bar Code! Check out the link that Dannywhac posted, it will help you figure out the year.

Also, definately not Standard forks.

mongoosefreak · 2012-11-20 12:24pm

milhous wrote:
Nice Bar Code! Check out the link that Dannywhac posted, it will help you figure out the year.

Also, definately not Standard forks.

I picked the bike up from the original owner,and he said that he pulled the forks off of his old Standard (that he no longer had) to build this bike. That's all I Really know about the forks. I Do know that they are very well built and very Heavy duty forks what ever they are. There is also a front brake cable guide on the back side of the forks. Also from the Great info that I gathered here in the museum. I Believe my frame is around a 2002 model. I Looked in the museum at the DK Seat post clamps info and did not see any like mine... http://bmxmuseum.com/forums/viewtopic.php?id=423840

Last edited by mongoosefreak (2012-11-20 12:28pm)

Haro-83 · 2012-11-20 12:40pm

midschooljon · 2012-11-20 12:43pm

As mentioned before those are definitely not Standard forks. Lovely bike though.

Dannywhac · 2012-11-20 12:50pm

Deffo a mid-school DK clamp - bought a couple when they re-did them in 1997+. They came in black or plain anno, no stickers or engraving. There's a black one on my General here:

http://bmxmuseum.com/bikes/dk/42948#.UKvsTYb4Gf0

mongoosefreak · 2012-11-20 1:34pm

midschooljon wrote:
As mentioned before those are definitely not Standard forks. Lovely bike though.

Thanks!! Now the question is what are the forks on my bike. There are no markings on them that I can see. I have also looked at a few different forks in the museum and did not see any forks that looked like mine..

Last edited by mongoosefreak (2012-11-20 1:35pm)

Dannywhac · 2012-11-20 3:09pm

The forks look like the bog standard Haro forks you could get from around 2003/4.

mongoosefreak · 2012-11-20 4:56pm

Dannywhac wrote:
The forks look like the bog standard Haro forks you could get from around 2003/4.

I Looked at some of the Haro's in the museum. The forks do look like they could be Haro forks.. So I may change the forks,and for sure the paint color,and leave everything else on the bike... Thanks for the help...

mongoosefreak · 2012-11-21 5:46pm

Dannywhac wrote:
Deffo a mid-school DK clamp - bought a couple when they re-did them in 1997+. They came in black or plain anno, no stickers or engraving. There's a black one on my General here:

http://bmxmuseum.com/bikes/dk/42948#.UKvsTYb4Gf0

I found some info on the seat post clamp, and was able to confirm that it is for sure a mid school DK clamp..

Login

Old Terrible 1 Barcode With some Sweet parts....

Old Terrible 1 Barcode With some Sweet parts....

#2 2012-11-19 2:21pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#3 2012-11-19 2:52pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#4 2012-11-19 3:44pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#5 2012-11-19 4:48pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#6 2012-11-19 5:29pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#7 2012-11-19 5:40pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#8 2012-11-19 5:49pm

Re: Old Terrible 1 Barcode With some Sweet parts....

ChiefRidesInWoods wrote:

#9 2012-11-19 6:05pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#10 2012-11-19 6:10pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#11 2012-11-19 6:12pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#12 2012-11-19 6:15pm

Re: Old Terrible 1 Barcode With some Sweet parts....

ChiefRidesInWoods wrote:

#13 2012-11-19 6:19pm

Re: Old Terrible 1 Barcode With some Sweet parts....

beej1968 wrote:

#14 2012-11-20 3:26am

Re: Old Terrible 1 Barcode With some Sweet parts....

#15 2012-11-20 10:23am

Re: Old Terrible 1 Barcode With some Sweet parts....

#16 2012-11-20 11:28am

Re: Old Terrible 1 Barcode With some Sweet parts....

#17 2012-11-20 12:07pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#18 2012-11-20 12:24pm

Re: Old Terrible 1 Barcode With some Sweet parts....

milhous wrote:

#19 2012-11-20 12:40pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#20 2012-11-20 12:43pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#21 2012-11-20 12:50pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#22 2012-11-20 1:34pm

Re: Old Terrible 1 Barcode With some Sweet parts....

midschooljon wrote:

#23 2012-11-20 3:09pm

Re: Old Terrible 1 Barcode With some Sweet parts....

#24 2012-11-20 4:56pm

Re: Old Terrible 1 Barcode With some Sweet parts....

Dannywhac wrote:

#25 2012-11-21 5:46pm

Re: Old Terrible 1 Barcode With some Sweet parts....

Dannywhac wrote:

Board footer