'76 R & R with gusset 
#1 2012-06-21 12:58pm
- tim1218
- Pro MemberCool Icee T

- From: Keyport, NJ
- Registered: 2009-11-20
- Posts: 5116
- Bikes: 25
- For Sale
- Feedback: 15300
'76 R & R with gusset
I just finished my '76 R & R, and the frame has a gusset welded to it. I haven't seen one on the Museum that has this.
I just saw a pic of Haney's and his has it.
Was this some factory thing? Is this rare?
Never seen the light blue decal. Not a Centurion or a CR-1?
See pics below
I want to list it here, but need to know the year. I'm thinking '76.
Thanks, Tim
Last edited by tim1218 (2012-06-25 7:00pm)
This is my signature. It is a small piece of text that is attached to my posts.
WANTED: SHIMANO DX PEDALS Black 9/16" | Original or REPRO Race Inc padset | Original or REPRO VECTOR padset in Black and a case of Twisted Teas
[img]http://i1103.photobucket.com/albums/g475/timmy121868/images.jpg[/img]
Offline
#2 2012-06-25 7:03am
- RandyS
- Centurion Member
- From: Grass Valley, CA
- Registered: 2006-04-27
- Posts: 228
- Feedback: 000
Re: '76 R & R with gusset
If it's a factory gussett that is one of the chromoly ones. Should weigh around 4 pounds. Pretty rare, the rest you see floating around are mild steel tanks.
Offline
#3 2012-06-25 7:04am
- tim1218
- Pro MemberCool Icee T

- From: Keyport, NJ
- Registered: 2009-11-20
- Posts: 5116
- Bikes: 25
- For Sale
- Feedback: 15300
Re: '76 R & R with gusset
RandyS wrote:
If it's a factory gussett that is one of the chromoly ones. Should weigh around 4 pounds. Pretty rare, the rest you see floating around are mild steel tanks.
It is fairly light.
Thanks
Last edited by tim1218 (2012-06-25 6:24pm)
This is my signature. It is a small piece of text that is attached to my posts.
WANTED: SHIMANO DX PEDALS Black 9/16" | Original or REPRO Race Inc padset | Original or REPRO VECTOR padset in Black and a case of Twisted Teas
[img]http://i1103.photobucket.com/albums/g475/timmy121868/images.jpg[/img]
Offline
#4 2012-06-25 6:23pm
- tim1218
- Pro MemberCool Icee T

- From: Keyport, NJ
- Registered: 2009-11-20
- Posts: 5116
- Bikes: 25
- For Sale
- Feedback: 15300
Re: '76 R & R with gusset
Here are the pics, no serial number that I found:








This is my signature. It is a small piece of text that is attached to my posts.
WANTED: SHIMANO DX PEDALS Black 9/16" | Original or REPRO Race Inc padset | Original or REPRO VECTOR padset in Black and a case of Twisted Teas
[img]http://i1103.photobucket.com/albums/g475/timmy121868/images.jpg[/img]
Offline
#5 2012-06-25 6:55pm
- Giginfrogg
- Pro MemberFroggy

- From: Ohio
- Registered: 2008-11-27
- Posts: 2551
- Bikes: 3
- For Sale
- Feedback: 25800
Re: '76 R & R with gusset
Real cool looking. Nice parts too. I like the pedals. ![]()
If I owe you feedback PM me. My inbox is like a WAR zone.
Wanted: 26" Quadangle F/F 1" threaded version What ever it may be....
Offline
#6 2012-06-25 7:48pm
- bmxerpete
- Pro Member

- From: West Palm Beach, FL
- Registered: 2008-07-30
- Posts: 5614
- Bikes: 9
- For Sale
- Feedback: 16100
Re: '76 R & R with gusset
I LOVE this bike. Someday I will own one. A few of the dudes I rode with way back when had those, none with a gusset as far as I can remember.
Offline
#7 2012-06-25 7:56pm
- JKelley
- Pro Member

- From: Redding, CA
- Registered: 2010-01-31
- Posts: 352
- Bikes: 5
- For Sale
- Feedback: 3600
Re: '76 R & R with gusset
I have had several of these frames over the years, all broken and re-welded (and tossed sad to say). The full chromoly version has a cigarette box shaped metal tube at the seat clamp area. The mild steel version has the flat plate like the one you have here and also the one I own.
Offline
#8 2012-06-25 9:11pm
- D...Nice
- Pro Member

- From: Los Angeles, CA
- Registered: 2007-01-22
- Posts: 2097
- Bikes: 14
- For Sale
- Feedback: 9900
Re: '76 R & R with gusset
JKelley wrote:
The full chromoly version has a cigarette box shaped metal tube at the seat clamp area. The mild steel version has the flat plate like the one you have here and also the one I own.
The one you're talking about with the cigarette box holding the seatpost mast is actually an R&R Superlight all 4130.... the R&R CM-1 is also all 4130 but has the flat plate....tim1218 the one you have looks to be the CR-1 Rigid frame all 1010 mild steel and yes the gussets is a factory thing as seen below.... either way they're cool to have.
Last edited by D...Nice (2012-06-25 9:16pm)
> > > Wanted List: MX-60 rims ~ ECKO Helmet - Large ~ Black Schwinn Banana Seat ~ Front 24" Skyway Tuff wheel White or Yellow ~ Patterson Decals ~ Sealed Sunshine Hubs < < <
Offline
#9 2012-06-25 9:47pm
- king stinger
- Pro Member

- From: Orange County, CA
- Registered: 2010-02-17
- Posts: 3326
- Bikes: 9
- For Sale
- Feedback: 16200
Re: '76 R & R with gusset
My first race bike in 77 was a full chromoly with the box gusset at seat post,super light bike and was fast,mine did crack at the seat post clamp area and my friends dad welded it,mine was candy blue over chrome.I do remember some like yours with the front gusset.
Offline
#10 2012-06-25 10:16pm
- vinro4416
- Pro Member

- From: BayArea * NorCal
- Registered: 2010-07-28
- Posts: 1639
- For Sale
- Feedback: 19000
Re: '76 R & R with gusset
Had a chromoly one too. Down tube cracked at the head tube. That frame was super light!
And great catalog pic. > add that one the research section.
K i n g S t i n g | C h a m p i o n 2 6 | P o w e r l i t e 2 4 | L a g u n a C r u i s e r
HUNTING FOR... (Rider survivor condition cool with me, cause parts will be used for riding)
• 24" Ukai speedline hoops or wheel set in RED or Araya 7x in chrome
• Powerlite Black Vinyl Crossbar and Stem Pad
• Black Schwinn Maximizers 26 or black Cheng Shin gumwall 26x1.95
• 26" Champion Forks
Online
#11 2012-06-26 4:23am
- ol'phart
- Pro Member

- From: Union, NJ
- Registered: 2010-06-05
- Posts: 2419
- For Sale
- Feedback: 35700
Re: '76 R & R with gusset
What year is that catalog ?
Offline
#12 2012-06-26 5:11am
- erdalicious
- Pro MemberPsycho Silence

- From: Willehood, Belgium
- Registered: 2008-12-25
- Posts: 10143
- Bikes: 18
- For Sale
- Feedback: 43000
Re: '76 R & R with gusset
that’s cool build Timmay ![]()
WTB: * Oakley F1 grips black/yellow * all KKT FMX/LMX Pedals * Skyway Tuff Graphite pedals/cages * nos red Oakley 2 right side only * nos red Oakley 1 left side only * nos chrome KKT FMX left side pedal 9/16
( . )( . )
)(
( Y )
Online
#13 2012-06-26 5:16am
- JKelley
- Pro Member

- From: Redding, CA
- Registered: 2010-01-31
- Posts: 352
- Bikes: 5
- For Sale
- Feedback: 3600
Re: '76 R & R with gusset
D...Nice wrote:
JKelley wrote:
The full chromoly version has a cigarette box shaped metal tube at the seat clamp area. The mild steel version has the flat plate like the one you have here and also the one I own.
The one you're talking about with the cigarette box holding the seatpost mast is actually an R&R Superlight all 4130.... the R&R CM-1 is also all 4130 but has the flat plate....tim1218 the one you have looks to be the CR-1 Rigid frame all 1010 mild steel and yes the gussets is a factory thing as seen below.... either way they're cool to have.
http://img2.uploadhouse.com/fileuploads … c206a3.jpg
Thanks for the knowledge and the heads up, love this site, always learning something!
Offline
#14 2012-06-26 7:53am
- tim1218
- Pro MemberCool Icee T

- From: Keyport, NJ
- Registered: 2009-11-20
- Posts: 5116
- Bikes: 25
- For Sale
- Feedback: 15300
Re: '76 R & R with gusset
D...Nice wrote:
JKelley wrote:
The full chromoly version has a cigarette box shaped metal tube at the seat clamp area. The mild steel version has the flat plate like the one you have here and also the one I own.
The one you're talking about with the cigarette box holding the seatpost mast is actually an R&R Superlight all 4130.... the R&R CM-1 is also all 4130 but has the flat plate....tim1218 the one you have looks to be the CR-1 Rigid frame all 1010 mild steel and yes the gussets is a factory thing as seen below.... either way they're cool to have.
http://img2.uploadhouse.com/fileuploads … c206a3.jpg
Great info, thanks!
This is my signature. It is a small piece of text that is attached to my posts.
WANTED: SHIMANO DX PEDALS Black 9/16" | Original or REPRO Race Inc padset | Original or REPRO VECTOR padset in Black and a case of Twisted Teas
[img]http://i1103.photobucket.com/albums/g475/timmy121868/images.jpg[/img]
Offline
#15 2012-06-26 6:56pm
- D...Nice
- Pro Member

- From: Los Angeles, CA
- Registered: 2007-01-22
- Posts: 2097
- Bikes: 14
- For Sale
- Feedback: 9900
Re: '76 R & R with gusset
ol'phart wrote:
What year is that catalog ?
1976
> > > Wanted List: MX-60 rims ~ ECKO Helmet - Large ~ Black Schwinn Banana Seat ~ Front 24" Skyway Tuff wheel White or Yellow ~ Patterson Decals ~ Sealed Sunshine Hubs < < <
Offline