BMXMUSEUM.com Forums

2007 DK General Lee

Here is my 2007 DK General Lee and here is the parts list.
FRAME: DK General Lee, Chromoly main tubes w/gyro tabs
FORK: Chromoly steerer
HANDLEBAR: (New) Eastern 100% chromoly Nitrous bars, 2 peice design and 7.5 inch rise
GRIPS: (New) Eastern Skull grips, the left grip has a (New) ODI alumium grip stop to keep it from sliding
STEM: Aluminum 1-1/8 threadless, top clamp design
HEADSET: 1-1/8 sealed cartridge bearings
BRAKE CABLE: (New) Odyssey Slick ( I removed the Gyro and made the brake a direct pull)
with (New) straddle cable and (New) cable hanger
BRAKE LEVERS: Dia Compe Dirty Harry
REAR BRAKE: (New) Tektro FX-15, U Brake with linear springs
CRANKS: (New) Poverty Carmi, 3 peice tubular 175mm length, 100% chromoly with pinch bolts
BB: (New) Ball Bearing, (New) 8 spline spindle
PEDALS: (New) Odyssey Twisted PC, 9/16 axles
SPROCKET: (New) DK USA made Iron Cross, 39 tooth, 10mm thick alumium
FREEWHEEL: (New) Dicta, 14 tooth
CHAIN: (New) GT 3/32
RIMS: (New) Kore Speed Hoops, 36 hole, double wall, aluminum, 1.75 width
HUBS: (New) Poverty Low Cash, 36 hole, sealed cartridge bearings, flip flop rear hub
the hubs also have (New) Fishbone screw on 14mm adaptors and (New) 14mm chain tensionors, left and right
SPOKES AND NIPPLES: (New) 14 guage chrome plated steel spokes and (New) chrome plated brass nipples
SADDLE: DK JR Dirt Jump design, 7mm rails
SEATPOST AND SEAT CLAMP: 24.5 x 250mm steel seat post and 28.6mm aluminum seat post clamp
TIRES: (New) GT AA Pro 2.125 width front and 1.75 width rear, 60 psi
BAR ENDS: Odyssey alumium
COLOR: Orange