2001 Schwinn Pro Stock Team
This my 100% stock 2001 Schwinn Pro Stock Team bike
Frame- 2001 Schwinn design 6061 T-6 aluminium racing frame with epicenter seat stays, machined head tube with top and down tube gussets, forged bottom bracket and chainstay yoke, extruded ram air seat stay yoke, forged dropouts with integrated chain adjuster (tensionor), 3/8 inch axel slots, Color- Silver/Blue (Sparkly Blue and Sparkly Silver)
Fork- Schwinn 100% 4130 cro-moly, oversized 1 and 1/8 steerer, 31.8mm fork blades that are ovalized with 6mm dropouts same as a 1/4 inch, 3/8 inch axel slots
Headset- Tange Seiki Aheadset, 1 and 1/8 diameter
Stem- Schwinn XS Aluminum with XS logo on the top
Handelbars- Schwinn XS 2 peice made of 100% chromoly, race design with 25.5 width and 7.75 height
Grips- Schwinn Stinger design Rally "S", in see through blue color with plastic bar ends and a ODI aluminium grip stop on the left grip to keep it from sliding down the bars Rear Brake Lever- Promax aluminum racing design
Hubs- Schwinn XS Six Shooter 2, made of 6061 T-6 aluminum and machined in the USA, high flange aluminum 36 hole with sealed bearings, 3/8 chromoly axles and the rear hub has flip flop threads so you can use any freewheel 16 teeth or higher on the one side and a 15,14 or 13 tooth freewheel on the other side, the Six Shooter hubs have a over hanging flange design, that increases the wheel strength and reduces the hubs weight and rotating weight
Rims- 36 hole aluminum, double walled 1.75 width rims, silver sided with a black top Spokes and nipples- 14g black stainless steel spokes and silver colored brass nipples
Tires- Schwinn XS Scrambler racing design tread, 2.125 front width and 1.75 rear width
Rear Brake- Promax linear pull V-brake, racing design with linear springs Chainwheel- Schwinn XS 44 tooth 3mm thick aluminum
Freewheel- 16 tooth Pedals- Schwinn XS Comp, aluminum platform with chromoly 9/16 axles
Bottom Bracket- Schwinn XS tapered sealed roller bearings that don't bind up and get harder to spin when you tighten them like other bearings do so they will always spin smooth, American sized aluminum bearing cups, the bottom bracket was made by FSA for Schwinn
Cranks- Schwinn XS drive shaft 3 (3 peice crank), 180mm length heat treated tubular chromoly arms made by FSA for Schwinn, oversized hollow chromoly 22mm 8 spline spindle. The cranks have XS logos on both arms and aluminum FSA spacers. 9/16 pedal bosses
Seat- Schwinn Stinger with 7mm chromoly rails, black with a silver Schwinn S stripe
Seatpost- Schwinn XS 26.8mm aluminum micro-adjust
Seatpost clamp- Schwinn XS six shooter aluminum with CNC machining
Submitted by The-Elemental-Empire (43 bikes in museum)
465 views 1 comment2 Faves Discuss this bike
